Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Solar Security Flood Light with PIR Motion Sensor and Remoter

Price $110.00
Min Order 1 Piece
Availability In Stock
Shipping From Guangdong, China
Popularity 445 people viewed
Model NO.:
HL-FR100P24G
After-sales Service:
Lifetime Service
Warranty:
3 Years
Light Source:
LED Lamp
Lamp Body Material:
Aluminum Alloy
Light Type:
Solar
Color Temperature:
6000K/4000K/3000K (Option)
Power:
100W
Technics:
Painted Matte
Illumination Time:
8h
Cell Type:
Lithium Battery
Charging Time (H):
6
Usage:
Garden, Street, Indoor, Parking Lot, Bus Stop
IP Rating:
IP65
Certification:
CE, RoHS
Voltage:
30V
With Light Source:
With Light Source
Solar Panel Power:
24V20W
Solar Panel Size:
430X345X25mm
Solar Panel Chip:
Mono Crystalline Silicon
Solar Panel Efficiency:
22%
LED Light Power:
100W
LED Chips:
90PCS 3030SMD
Light Luminous Efficiency:
175lm/W
Luminous Flux:
7996lm
Work Mode:
PIR Motion Sensor
PIR Detection Distance:
8-10m
Li-ion Battery:
21V 8000mAh
Battery Power:
168wh
Beam Angle:
120 Degree
Running Time:
5-50 Hours
Rendering Index:
>75
Trademark:
Goginsor or OEM
Transport Package:
Cartons and Pearl Cotton or Pallet
Specification:
Light Size 335x235x160mm
Origin:
China
HS Code:
9405410000
Product Description
Product Description

1. Solar Flood Light  with 2.4G Remote Control is an advanced commercial-grade energy-efficient lighting system .

2. One Remote Control can be linked to up to Four Groups Flood Lights, Each Group can up to 256 Lights.
3. These Lights can be combined into a lighting system.and when one of the lights detects movement, all lights linked to the remote control will
    be turn on.

4. The detection distance of this sensor is 8-10 meters, The controllable range between the lights can be up to 100m.
5. Bright Powerful 30W lighting supplied by 120 LED SMD3030 with adjustable brightness 8% to 100% via the Remote Controller.It can last for
   36hours
 at 8% brightness.
6. The light can be operated with Remote pad or manually switch . Press and Hold the Dimmer+/Dimmer-. All lights can be dimmed together.
7. The Sensor can be set a delay time(Time Knob) and adjusted ambient brightness (LUX Knob). See the PIR PAD diagram.
8. Even if the remote control turns off all lights, the Sensor will still turn on all lights when someone enters the detection area.

9.Ultra long battery life-such as setting a delay of 15 seconds for lighting and sensing 100 times per night, which can last for 5-7 days.

Product Parameters

    Charging Indicator Light
       1. Solid Green LED = Battery full Charged
        2. Flashing Green or Yellow or Red = Battery charging
        3. Battery Level Display:
            Green LED = High Volt ( >18.5V ),
            Yellow LED = Medium Volt (18.5-16.5V),
            Red    LED  = Low Volt  (<16.5V).

   Please Note:The indicator will flash when charging, and when fully charged, it will display green.
   On/Off Switch Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.

Installation Instructions

 # Once a program mode is selected the light cannot be turned ON/OFF or dimmed with the Master button. Choose button '4o' (RF mode) to revert to standard mode to control these functions.

Programme Clear 
     
If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
        1. Turn on the light.
        2.  Quickly press Master " I " key 5 times.
        3. LED lights will blink 5 times which means that the Programme is cleared successfully.

 

Adjust the PIR Sensor 

    LUX Dial: Adjusts the level of darkness at Dusk that must be reached before the light turns on.                                                     
    TIME Dial: Adjust delay time from 5 seconds to 5 minutes.               
    SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).

Detailed Photos

Certifications

Packaging & Shipping

 

FAQ
1. Are you a factory or a trading company?

 A: We are a manufacturer. Welcome OEM and ODM for you.

2. Can we have a sample order?

A: Of course! Any sample order is welcome for testing and checking.

3.What is the warranty for the products?

A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years

4. What about the lead time?

 A:Sample needs 3-5 days, mass production time needs 2-3weeks.

5.How to ship the goods?

A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)

6.How to deal with the faulty? 

A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.
 




 
 
  • Similar Products
Full Page Contact Supplier