Special Wax for Investment Casting Bonding Wax Patterns and Casting Systems

Adhesive wax
The precision casting adhensive waxis a special wax used to bond the wax mold and the casting system. Simply heat the hensive wax to a certain temperature, directly bonding the wax mold sprue and pouring system together.
more efficient than traditional iron soldering bonding,bonding more firmly, more environmentally friendly and less g beneficial to improve the pass rate of castings.Adhensive wax has a good compatibility. there will be no change of m performance when using together with mold wax. While the adhensive wax will not have any adverse effects on the next shelling process.

Adhensive wax will be dewaxed and burned in the roasting, the ash content is below 0.01%. It is a special wax of targeted development. Strong cohesive force, seamless, it avoided the casting defect caused by gap and refractories-off in tradit wax assembling and dewaxing. It will improve the pass rate.

Application:
Usedin assembling ofprecision casting wax parts and welding of wax parts.
1.Instead of traditional iron soldering bonding, avoiding the dense smoke and surface defects during wax assembling and wax welding.
2.High strength, without break during wax assembling, repairing, washing and drying
3.Good intermiscibility, when it is mixed with the model wax, there will be no affect to the performance and properties ot
waX.
4.Strong adhesion, it can be used directly even there will be mold release agent on the surface of wax part.

Typical properties
Viscosity at 99 oC IP71 1000-1200 cps
Penetration at 25oC IP49 3.5-4.5 dmm
Drop Melting Point IP 371 70-75ºC
Form of Supply semi-pellets or Blocks
Usage and attentions:
1. When bonding, apply force for only a few seconds.
2.Adjust the temperature to 160C will be ok, when melting the wax via a container.
Product Description