Swipe or use the arrows to view product images.
Stainless Steel Sanitary Tank Bottom Diaphragm Membrane Valve SS316L/ Manual Tank Bottom Diaphragm Valve
| Price | $300.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 500 people viewed |
Media:
Water
Temperature:
High Temperature
Actuator:
Manual
Material:
Stainless Steel
Pressure:
Low Pressure
Flow Direction:
Unidirection
Function:
Solenoid Valve
Usage:
Drain
Standard:
DIN, ANSI
Body Material:
SS304, SS316L
Valve Body Material:
EPDM, Silicone, FKM
Working Pressur:
Less Than or Equal to 0.4um
Maximum Temperature:
150 Degree Celsius
Air Source Pressure:
0.4 ~ 0.6MPa
Gas Pipe Connection:
R1/8"
Configuration:
C-Top Intelligent Controller or Two Proximity Swi
Trademark:
eraval
Transport Package:
Packing in Cartons and Wooden Cases
Specification:
1"~4" or DN40~DN150
Origin:
Made in China
HS Code:
8481804090
Product Description
| Tank bottom diaphragm valve |
Description:
Tank bottom valves are mainly used in thepharmaceutical, food and beverage industries. Theyare generally installed at the bottom of tanks to playthe role of sampling and drainage. They can also beintegrated for SlP/ClP, The tank bottom valve isevolved on the basis of the diaphragm valve. ltssealing weir is as close as possible to the tank wal!to avoid dead corners at the bottom of the tank.
Tank bottom valves are mainly used in thepharmaceutical, food and beverage industries. Theyare generally installed at the bottom of tanks to playthe role of sampling and drainage. They can also beintegrated for SlP/ClP, The tank bottom valve isevolved on the basis of the diaphragm valve. ltssealing weir is as close as possible to the tank wal!to avoid dead corners at the bottom of the tank.
| Parametric technique: |
| Working pressure | 0-10bar,145psi(EPDM) |
| 0-7bar,101psi(EPDM+PTFE) | |
| Operating temperature | -40~130ºC(EPDM) |
| -40~150ºC(EPDM+PTFE) | |
| Driving mode | Manual / Pneumatic |
| Valve body material | SS316L |
| Surface treatment | The outer surface is sandblasted |
| Internal surface treatment Ra ≤ 0.375μm | |
| Connection mode | Welding / Clamp end |
| 3A,ISO,DIN,ASNE BPE |
- Similar Products
$85.00
1 Piece (MOQ)
Industrial Saunders Straight - Through Diaphragm Valves
Suzhou Shuangheng Valve Co., Ltd.