Swipe or use the arrows to view product images.
Stainless Steel Tank Bottom Ball Valve/Manual Clamped 3PC Tank Bottom Ball Valve
| Price | $100.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 517 people viewed |
Model NO.:
CY-TBV02
Media:
Water
Material:
Stainless Steel
Connection Form:
Clamp
Driving Mode:
Manual
Nominal Pressure:
0-10bar
Channel:
Straight Through Type
Structure:
Hard Seal
Type:
Through Ball Valve
Function:
Meets CIP SIP Sterilization and Cleaning
Temperature:
High Temperature
Standard:
3A SMS DIN Idf Rjt Bpe ISO
Application:
Industrial Usage
Temperature Resistance:
-40~+150 Degree Celsius
Connection Method:
Clamped, Welding, Thread, Flange.
Seal Ring Material:
PTFE
Design Feature:
Electric and Pneumatic
Trademark:
eraval
Transport Package:
Wooden Case Packing
Specification:
1/2"~6" or DN15~DN150
Origin:
China
HS Code:
8481804090
Product Description
Tank bottom ball valve
Application:
This ball valve with special tank bottom flange connection,be welded on the tank bottom.The design of contour and radius have effective gravity discharge function.Also smooth taper hole and the sphere closely to the bottom,which prevent the medium from staying at the entrance of valve.Make sure drain smoothly.
Design feature:
Small fluid resistance,resistance equal to same length section of pipe.
Simple structure,small volume,light weight.
Easy to operate,open and close rapidly,from fully open to fully closed only 90 degree rotation,convenient remote control.
Easy maintenance,simple structure,convenient to disassembly and replacement the seal.
Close and reliable, the sealing material of the ball valve uses PTFE, in the full open or full closed, the sealing surface of the ball and the valve seat is isolated from the medium, when the medium passes, it will not cause the erosion of the sealing surface.
Connection:Clamp,weld,thread,flange.
Size:1"~4"/DN25~DN100
Standard:3A,DIN,SMS,IDF,RJT,BPE,ISO
Application:
This ball valve with special tank bottom flange connection,be welded on the tank bottom.The design of contour and radius have effective gravity discharge function.Also smooth taper hole and the sphere closely to the bottom,which prevent the medium from staying at the entrance of valve.Make sure drain smoothly.
Design feature:
Small fluid resistance,resistance equal to same length section of pipe.
Simple structure,small volume,light weight.
Easy to operate,open and close rapidly,from fully open to fully closed only 90 degree rotation,convenient remote control.
Easy maintenance,simple structure,convenient to disassembly and replacement the seal.
Close and reliable, the sealing material of the ball valve uses PTFE, in the full open or full closed, the sealing surface of the ball and the valve seat is isolated from the medium, when the medium passes, it will not cause the erosion of the sealing surface.
Connection:Clamp,weld,thread,flange.
Size:1"~4"/DN25~DN100
Standard:3A,DIN,SMS,IDF,RJT,BPE,ISO
- Similar Products
Negotiable
10 Pieces (MOQ)
Electric High Platform Fluorine Lined Ball Valve
Zhejiang Yonglian Valve Group Co., Ltd.
$26.49
1 Piece (MOQ)
Winvall 3/4 Inch 2 Way Electric Small Valve 24VAC Actuator
Winner Ball Valves Co., Ltd.
$0.60
1000 Pieces (MOQ)
CPVC UPVC Two Pieces Ball Valve with ANSI Standard
NINGBO RONGPENG INTERNATIONAL TRADING CO., LTD.
$100.00
10 Pieces (MOQ)
Factory Direct Deal 3PC Electricthread Ball Valve Ss\Wcb DN8-DN100
Zhongxin Valve Co., Ltd.