Audited Supplier
CY-TBV02
Water
Stainless Steel
Clamp
Manual
0-10bar
Straight Through Type
Hard Seal
Through Ball Valve
Meets CIP SIP Sterilization and Cleaning
High Temperature
3A SMS DIN Idf Rjt Bpe ISO
Industrial Usage
-40~+150 Degree Celsius
Clamped, Welding, Thread, Flange.
PTFE
Electric and Pneumatic
eraval
Wooden Case Packing
1/2"~6" or DN15~DN150
China
8481804090
Product Description
Tank bottom ball valve
Application:
This ball valve with special tank bottom flange connection,be welded on the tank bottom.The design of contour and radius have effective gravity discharge function.Also smooth taper hole and the sphere closely to the bottom,which prevent the medium from staying at the entrance of valve.Make sure drain smoothly.
Design feature:
Small fluid resistance,resistance equal to same length section of pipe.
Simple structure,small volume,light weight.
Easy to operate,open and close rapidly,from fully open to fully closed only 90 degree rotation,convenient remote control.
Easy maintenance,simple structure,convenient to disassembly and replacement the seal.
Close and reliable, the sealing material of the ball valve uses PTFE, in the full open or full closed, the sealing surface of the ball and the valve seat is isolated from the medium, when the medium passes, it will not cause the erosion of the sealing surface.
Connection:Clamp,weld,thread,flange.
Size:1"~4"/DN25~DN100
Standard:3A,DIN,SMS,IDF,RJT,BPE,ISO
Application:
This ball valve with special tank bottom flange connection,be welded on the tank bottom.The design of contour and radius have effective gravity discharge function.Also smooth taper hole and the sphere closely to the bottom,which prevent the medium from staying at the entrance of valve.Make sure drain smoothly.
Design feature:
Small fluid resistance,resistance equal to same length section of pipe.
Simple structure,small volume,light weight.
Easy to operate,open and close rapidly,from fully open to fully closed only 90 degree rotation,convenient remote control.
Easy maintenance,simple structure,convenient to disassembly and replacement the seal.
Close and reliable, the sealing material of the ball valve uses PTFE, in the full open or full closed, the sealing surface of the ball and the valve seat is isolated from the medium, when the medium passes, it will not cause the erosion of the sealing surface.
Connection:Clamp,weld,thread,flange.
Size:1"~4"/DN25~DN100
Standard:3A,DIN,SMS,IDF,RJT,BPE,ISO
