Stainless Steel Viking Johnson Ductile Cast Iron Dismantling Joints

Dismantling joint

Specification: 80mm-2200mm
Standard: ISO2531
Gasker ring: EPDM
Bolt/nut: Zinc-plated/SS304

Ydera Machinery Limited, as a big and professional manufactural and exporting company based in Shandong province of China, we have three foundries, and our main products are casting iron products for construction and water treatment field, typical products as below.
1) Ductile casting iron pipe, and fittings(Diameter from DN80 to DN2000mm), including Socket bend, Flanged bend, Socket and Flanged TEE, Flanged socket, Socket taper, blank flanges, as well as Flanged adapter, coupling, dismantling joints, PVC pipe fittings. As well as EPDM gasket rubber ring.

All of them are according to ISO2531/EN545/EN598/AWWA110/153. (PN10/PN16PN25/PN40)

2)Valve products such as Butterfly Valves, Gate Valves, Check Valves, Globe Valves, Strainers, in Grey Iron and Ductile Iron, by standard BS5163/BS5150/DIN3352/AWWA C509.
 

 

Company Profile

VORTEX QINGDAO PIPE FITTING CO.,LTD. is a large professional manufacturing factory which located in Shandong Province. Our main products as below:
1) Ductile iron Articulated Cable Pipe/Split Pipe(size DN40-400mm)and Accessories,
Our Articulated Cable pipe systerm developed to protect shallow water abrasion and impact protection for Submarine cable.
The APS is suitable for installation and recovery in water depths down to 100M.This APS systerm has been used on various submaine cable shore-ends,cable pipeline crossings and post installation cable protection.
Accessories:such as flange adaptor,dogbone clamp,saddle clamp,interconnect adaptor,and bend restrictor,ect.

2)Ductile iron Pipe and fittings(Size DN80- 2000MM),standards ISO2531 /EN545 /EN598,and Pressure PN10 /PN16 /PN25 /PN40, such as socket and flanged bend,socket and flanged tee,blank flange,taper,as well as welding flanged pipes for drinking water and sewage pipeline.
     2000MM),standards ISO2531 /EN545 /EN598,and Pressure PN10 /PN16 /PN25 /PN40, such as socket and flanged bend,socket and flanged tee,blank flange,taper,as well as welding flanged pipes for drinking water and sewage pipeline.
3)Couplings, such as Flanged adaptor,coupling,dismantling joints and other Viking Johnson type's fittings(DN80- 2000) for drinking water systerm.

4)Valves,such as Resilient seated gate valve,knife gate valve,check valve,air valve,butterfly valve,global valve,Y strainer,Fire Hydrant,ect.

5)SS304/201 repair clamp and ductile iron saddle clamp for DI/pe/pvc pipe and so on.