ANSI150 EPDM/NBR Rubber Expansion Joint /Carbon Steel Rubber Expansion Joint with Zinc Plated

1 EPDM/NBR  rubber expansion joint,  ANSI150EPDM rubber expansion joint, carbon steel rubber expansion joint, Rubber expansion joint,carbon steel Rubber expansion joint,  rubber expansion joint,Carbon Steel NBR Rubber Compensator

 
Rubber Expansion Joints are widely used in industry such as Chemical, Fertilizer, Cement, Power, Steel Plants and so on. As they are effective in construction and excellent in movement, anti-vibration.

Features
1) Designed according to ANSI, DIN and BS
2) Type: Single sphere joint flange type
3) Main body: EPDM, NBR, neoprene
4) Lining: Chinlon cord fabrics
5) Frame: Hard steel wires
6) Flange: Carbon steel, stainless steel
7) Union: Malleable iron
9) Size: 1/2" to 24"

• Standard single sphere rubber expansion joint 1.pn6/10/16/25. 2.dn25~1600. 3.lenght:95-300. 4.carbon/stainless steel. Kxt type single sphere rubber expansion joint. Advantage. 1)this product is made from rubber sphere and free-cober metallic flange those are composed of lining gumwater, nylon cord fabric or fortified polyester cord fabric and outer gumwater. 2)it has many characteristics:. *withstand high pressure. *good elasticity. *big displacement. *good effect of absorbing shock and reducing noise. *easy for installation. 3)it can be widely used in pipe systems of supplying and draining water,heating,ventilation,air-conditioning,fire-control,compressor,papermaking,medical preparation,ship,water pump,blower,etc.

3.Notes

Notes:1. For OEM orders with special requirement, rubber joints can be made according to customers' drawings. Generally, flange standard is GB/T9115.1-2000, other GB, JB, HG, CB, ANSI, DIN, BSEN, NF, EN, JIS, ISO flanges are also available upon request. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc.
2.When rubber joints size above DN200 are used for overhead water supply system, the pipes must be equipped with fixed supports or fixed brackets, otherwise control units shall be installed on rubber joints.
3.Matching flanges of rubber joints shall be valve flanges or GB/T9115.1(RF) flanges.