Swipe or use the arrows to view product images.
UV-Curing Resin Kit for Beginners, Fast Curing and Immediate Cure, Crystal Clear
| Price | $2.48 |
|---|---|
| Min Order | 220 kg |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 377 people viewed |
Model NO.:
UV-2301
Molecular Principal Chain:
Carbon Chain Polymer
Color:
Light Yellow Transparent Liquid
Viscosity (25ºC):
400-500mPa·s
Solid Content:
52-58%
Trademark:
Xinshen/Huake
Transport Package:
IBC Tank/Drum
Specification:
ISO/NPG
Origin:
Jiangsu, China
HS Code:
3907910000
Product Description
Product Name:UV-2301 UV-curable Unsaturated Polyester Resin
1. Brief Introduction:Introducing the UV2301: a cutting-edge, highly reactive, and medium-viscosity isophthalate neopentylene glycol type unsaturated polyester resin.. Stabilized and thickened with magnesium oxide, this resin cures rapidly under ultraviolet light, showcasing exceptional glass fiber wettability, rapid curing time, and outstanding mechanical properties. Ideal for trenchless sewer pipeline repair (CIPP), as well as oil and gas pipeline applications.
2. Technical Data Sheet for Liquid Resin:
Curing system in SPI test:Hardener AKZO CH-50: 2%;
3. Physical properties of casting (for reference only):
3. Physical properties of casting (for reference only):
Note:The casting is prepared according to GB/T8237; Curing conditions: UV LED LS128 with light intensity of 14mW/cm², curing time: 5 minutes.2
, 5min.
4 . Suggestions for use:1) For optimal performance, UV2301 resin can be thickened using magnesium oxide paste. The viscosity and thickening rate are dependent on the type and quantity of the magnesium oxide paste. Small-batch trials are recommended to determine the best parameters.with the model and amount of magnesium oxide paste on the thickening viscosity andthickening rate.So, small batch trials are recommended before use.
2) UV2301 resin is compatible with *** lamp and UV-LED lamps for curing. For other light sources, conduct small-batch trials to ensure compatibility.by *** lamp and UV-LED lamp, if you need to use other light sources for curing, please do small-batch trialsin advance.
5. Storage:
1) The product must be packaged in a black IBC tank or iron drum to protect the resin's ultraviolet light initiator. Ensure the container remains in a dark, 100% opaque environment.
2) Transportation must comply with the State Council's "Chemistry Dangerous Articles Safety Management Regulations."
3) Avoid exposure to heat sources, including direct sunlight and steam pipes. Keep sealed to prevent moisture absorption and monomer loss. Store in a dry place below 25ºC for a maximum shelf life of 6 months.
Note that storage time decreases as temperature increases.
, 5min.
4 . Suggestions for use:1) For optimal performance, UV2301 resin can be thickened using magnesium oxide paste. The viscosity and thickening rate are dependent on the type and quantity of the magnesium oxide paste. Small-batch trials are recommended to determine the best parameters.with the model and amount of magnesium oxide paste on the thickening viscosity andthickening rate.So, small batch trials are recommended before use.
2) UV2301 resin is compatible with *** lamp and UV-LED lamps for curing. For other light sources, conduct small-batch trials to ensure compatibility.by *** lamp and UV-LED lamp, if you need to use other light sources for curing, please do small-batch trialsin advance.
5. Storage:
1) The product must be packaged in a black IBC tank or iron drum to protect the resin's ultraviolet light initiator. Ensure the container remains in a dark, 100% opaque environment.
2) Transportation must comply with the State Council's "Chemistry Dangerous Articles Safety Management Regulations."
3) Avoid exposure to heat sources, including direct sunlight and steam pipes. Keep sealed to prevent moisture absorption and monomer loss. Store in a dry place below 25ºC for a maximum shelf life of 6 months.
Note that storage time decreases as temperature increases.
- Similar Products
$6.00
1000 kg (MOQ)
Unsaturated Polyester Resin for Coating Application
Changzhou Promisechem Co., Ltd.