Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Xbd-Tdl 2inch 4L/S Vertical Multistage Jockey Pump for Fire Fighting Pressure Stablized

Price $686.00
Min Order 1 Piece
Availability In Stock
Shipping From Shanghai, China
Popularity 509 people viewed
Model NO.:
XBD-TDL4W
After-sales Service:
Online Service
Warranty:
12-24 Months
Max.Head:
200m
Max.Capacity:
120L/S
Driving Type:
Motor
Impeller Number:
Multistage Pump
Working Pressure:
Middle Pressure Pump
Influent Type of Impeller:
Single Suction Pump
Position of Pump Shaft:
Vertical Pump
Pump Casing Combined:
N/a
Mounting Height:
Since Irrigation Centrifugal Pumps
Impeller:
Closed
Usage:
Pump, Fire Fighting
Impeller Material:
SS304
Shaft Material:
40cr
Speed:
2900rpm
Case Material:
Stainless Steel
Voltage:
380V
Frequency:
50Hz
Sealing Type:
Mechanical Sealing
Coupling Type:
Clamping Coupling
Trademark:
tqpumps
Transport Package:
Wooden Case
Specification:
CCCF/CE
Origin:
China
HS Code:
8413709910
Product Description
Product Description

TDL Vertical Multi-stage Centrifugal Pump is a new generation product developed according to the water supply and drainage standards in high-rise buildings and Chinese fire standards. Due to adopting an efficient and energy-saving superior hydraulic model, this type of pump has the advantages of high efficiency and a wide range of performance. Moreover, the model is optimized with a more rational distribution, which can better meet the fire protection needs of different floors and Pipe Resistance.

Model Meaning
 

working condition

1. It can transport clean water or non-corrosive media similar to clean water in physical and chemical properties, with the volume of solid insoluble not exceeding 0.1% of the unit volume. If the medium contains fine particles, please specify when ordering;
2. Medium temperature: -15ºC~+95ºC;
3. Maximum system working pressure ≤2.5MPa;
4. The ambient temperature should be below 40ºC and relative humidity below 95%.
 

Product Advantage

1. Compact structure, small volume, and takes up less space.
2. Convenient to replace wearing parts (mechanical seal), that is "easy to dismantle," without disassembling the motor.
3. No adjustment is required for assembly, easy to disassemble, inspect, and repair.
4. Radial and axial forces are balanced hydraulically combined with bearing support.
5. Uses hot water-type specialized mechanical seals, capable of pumping hot water.

Application

Product Structural Drawing

1. This type of pump has a vertical multi-stage segmental structure, tightly bolted together by the inlet section, middle section, and outlet section. Each stage is equipped with an impeller and guide vane, and the axial force is balanced hydraulically, with any residual axial force borne by one or a pair of ball bearings.
2. The shaft seal uses a specially designed mechanical seal. When replacing the mechanical seal, there is no need to dismantle the motor. By removing the intermediate clamshell coupling, the seal can be taken out, which has the advantage of being convenient for replacement and maintenance. The pump is driven by a vertical motor through the clamshell coupling. Looking from the motor end, the pump rotates clockwise.
3. The motor can be equipped with standard IE2/IE3/IE4 series V1 type motors, 380V, 50HZ, three-phase, 2900 rpm.
4. The pump's suction port is at the bottom, and the discharge port is at the top. Their relative positions can be chosen as one of 0°, 90°, 180°, 270° according to user requirements for assembly and delivery. 

 
Product Parameters
 
Item No.ModelDIN DiameterCapacityHeadMotor PowerSpeed
L/SmkwRPM
83XBD6.5/4W-TDLDN504655.52900
84XBD7.0/4W-TDLDN504705.52900
85XBD8.0/4W-TDLDN504805.52900
86XBD9.0/4W-TDLDN504907.52900
87XBD10.5/4W-TDLDN5041057.52900
88XBD11.5/4W-TDLDN504115112900
89XBD12.5/4W-TDLDN504125112900
Company Profile

  • Similar Products
Full Page Contact Supplier