Swipe or use the arrows to view product images.
Zirconium Crosslinker for Sandstone Hydraulic Fracturing Stimulation Guar Gum Based Fluid Ultra High Temperature- Customized Petroleum Additives-01
| Price | $4500.00 |
|---|---|
| Min Order | 5 Tons |
| Availability | In Stock |
| Shipping From | Sichuan, China |
| Popularity | 321 people viewed |
Model NO.:
ZC-90
Certification:
CCIC
Environmental Protection:
Yes
Color:
Yellow
Appearance:
Liquid
Kind:
Crosslinker
Application:
Composite Additive
Trademark:
ENERGY
Transport Package:
IBC Tank or 55gal Drum
Specification:
IBC tank or 55gal drum
Origin:
China
Product Description
Introduction
Crosslinkers are generally introduced to polymer-based fracturing to improve rheological properties of the fracturing fluids. Zirconium Crosslinker is a Zirconium Chelate crosslinker used for crosslinking guar-based fluids for high temperature applications. Crosslinking of Zirconum fluids are temperature dependent.
Physical Properties and Hazards
Chemical Properties and Application
Crosslinker KHF026 is a Zirconium crosslinker used for crosslinking guar and guar derivative based fracturing fluids. The crosslinking is very slow if Zirconium Crosslinker is added into linear gel (pH 6-8). However, the crosslinking is activated by raising the fluid pH value above 8.5, and causes rapid crosslinking to occur in HPG and CMHPG fluids. Since crosslinking of Zirconium fluids are temperature dependent, higher temperature is needed to crosslink.
Zirconium Crosslinker can be used to crosslink most guar or guar derivative based fracturing fluids. It is compatible with most additives used in fracturing fluid systems which are engineered for use up to 350 degF (177 degC).
Kindly Reminder
(1) All the performance and standard is based on Saudi Aramco standard.
(2) This products can be made by customization(Base on temperature, concentration, viscosity requirement) .
Crosslinkers are generally introduced to polymer-based fracturing to improve rheological properties of the fracturing fluids. Zirconium Crosslinker is a Zirconium Chelate crosslinker used for crosslinking guar-based fluids for high temperature applications. Crosslinking of Zirconum fluids are temperature dependent.
Physical Properties and Hazards
| Form | S.G. | Water Solubility | Health Hazard | Physical Hazard | pH |
| Brown Liquid | 1.30-1.40 | Miscible | Moderate- Eyes | Moderate-Fire | 9.0-10.0 |
Chemical Properties and Application
Crosslinker KHF026 is a Zirconium crosslinker used for crosslinking guar and guar derivative based fracturing fluids. The crosslinking is very slow if Zirconium Crosslinker is added into linear gel (pH 6-8). However, the crosslinking is activated by raising the fluid pH value above 8.5, and causes rapid crosslinking to occur in HPG and CMHPG fluids. Since crosslinking of Zirconium fluids are temperature dependent, higher temperature is needed to crosslink.
Zirconium Crosslinker can be used to crosslink most guar or guar derivative based fracturing fluids. It is compatible with most additives used in fracturing fluid systems which are engineered for use up to 350 degF (177 degC).
Kindly Reminder
(1) All the performance and standard is based on Saudi Aramco standard.
(2) This products can be made by customization(Base on temperature, concentration, viscosity requirement) .
- Similar Products