

Technical Parameter:
Fluid | gas without water molecules (except acetylene) |
Velocity range | 0~60m/s |
Accuracy | Reading±1%,full range±0.5% |
Repeatability | full range0.2% |
Temperature | Environmental conditions:-20ºC~70ºC;Medium temperature:-20ºC~120ºC or -20ºC~350ºC |
Power | 24VDC/220VAC |
Output | 4~20mA,pulse |
Response time | ≤1s |
temperature coefficient | 0.05%/ºC |
Communication interface | serial port output RS485,HART |
Screen content | quantity of heat,flow for short period;total flow |
Pressure | ≤4.2MPa |
connection | locking device/ball valve, flanged joint,Flange mounting |
Explosion proof grade | Exd II CT4 |
Ingress protection | Sensor IP67;transmitter IP65 |
Alarm point | Relay dry contact output, can choose the upper limit single alarm or lower limit double alarm |
Sensor diameter | 3mm/4mm/5mm |
Probe diameter | 18mm |
Sensor texture | 1Cr18Ni9Ti;304L;hastelloy C;Ta |
Probe texture | 1Cr18Ni9Ti;304L;hastelloy C;Ta |
Shell texture | Dangerous areas to install shell for powder coated aluminum castings |
Electrical interface | M20X1.5 |
Pressure loss | Pipe diameter greater than DN80 can be ignored |
Connaction type:

Field application

The company was founded in 2010. In 2012, it won the excellent incubation enterprise of Weihai City. It is a high-tech enterprise supported by the Weihai Municipal Government. In 2017, the company was listed as a securities company.
The company has successively obtained ISO9001-2015 international quality system certification, ISO14001-2015 environmental management system certification, OHSAS18001-2007 occupational health and safety management system certification and ISO10012-2003 measurement management system certification, CE certificate,

Exhibition information



Q:What kind of products do you offer ?
A:We supply pressure sensor, level sensor, flow meter and digital controllers. Main market is European countries, the Middle East and Asia. Certificates are international ones.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO and CE ,we could send the certification test of our company to you.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q:Could I visit your factory?
A:Of course,if you need we will help you to visit our factory.
Q: How can I get the quotation or send my inquiry to?
A: Send your inquiry to us by the inquiry from on the right-side or the bottom of this page.