Audited Supplier
Color : Grey
Thickness :0.8mm
Length: 3m /33m(as your choose)
Width:5mm/10mm/15mm/20mm/30mm/40mm/50mm
Adhesive on both sides
3M Strong Permanent Double Sided Super Self-Adhesive Sticky Tape Roll Adhesive
Fast and easy-to-use permanent bonding method provides high strength and long-term durability
Virtually invisible fastening keeps surfaces smooth
Can replace mechanical fasteners (rivets, welding, screws) or liquid adhesives
Grey, thickness: 0.8mm, modified acrylic adhesive and very conformable acrylic foam core bonds to a wide variety of substrates including powder coated paints and irregular surfaces
Relative Adhesion:
HSE - High Surface Energy
LSE - Low Surface Energy
Anti-temperature :93°C~149°C
Application:Typical applications include: body side moldings; stainless steel, ABS and PVC rocker panels; wheel lip moldings, door edge
Features:3M acrylic foam tape is characterized by high performance peel and shear adhesion, high internal strength, good conformability and excellent plasticizer resistance.
| Brand Name | 3m |
| Model Number | 5604 5608 |
| Material | Acrylic foam |
| Adhesive Side | Double Sided |
| Feature | Heat-Resistant |
| Product Name | 3M Tape 5604 5608 Acrylic Foam Tape |
| Temp resistant | -40°C to +90°C short term 120°C |
| Color | grey |
| Thickness | 0.4mm, 0.8mm |
| Size | 610mm*33m |
| Liner | Red film liner |
| shape | Custom Shapes |
| Width/Length | Customize Size Accepted |
| Sample | Freely |
Line of business of our company:
1. Tarps repair tape, foam tape, PVC/PET tape, paper kraft tape, anti-slip tape, high temperature resistant tape, electrically conductive tape etc.
2. Support die cutting service and provide suggestions on tape using. We can recommend right tape base on customers' application and help die cut to the shape and size that customer need.
3. Moreover, we have close cooperation with many excellent brother companies, so we can provide you one-stop service, also efficient and reliable technical service and support.Realize your ideas, we assure your excellence with low cost!
Our products are extensively used in Logistics and Transport Industry, optical industry (including mobile phone manufacturers, computer manufacturers, camera manufacturers, LCD manufacturers, etc.), semiconductor industry, automobile, electronics, LED, motor, transformer, electronic industry, microelectronics, information material, building, aviation and other industries.
Q. What percent of the final bond strength can I expect immediately after application? After 24 hours? After 72 hours?
A. Immediately after an application is made, about 60% of the bond strength is achieved. As the adhesive continues to wet-out the surface, you can expect the bond to be at about 75% - 80% after 24 hours. After 72 hours, 95%+ of the bond strength is achieved. The bond will continue to build with time.
Q. Is the tape solvent resistant?
A. Yes, 3M acrylic foam tapes are resistant to most common automotive solvents like gasoline, diesel fuel, washer solvent, etc. Solvent resistance is a function of type of solvent, time of exposure and temperature.
Q. Why doesn`t the tape feel sticky?
A. 3M`s high performance acrylic adhesives tend to be firm and dry to the touch. They are designed to bond materials other than skin. The adhesives used are designed to give optimum performance and adhesion to automotive substrates and components. The natural oils and moisture of skin can vary from person to person and affect the "thumb appeal" of the 3M Acrylic Foam Tape. To one person the tape can feel very sticky and to another it can feel much less sticky to the touch. The difference in "thumb appeal" is in the variation of the 2 individual`s skin surfaces not the adhesive.
Q. The part is not adhering to the vehicle. What might be wrong?
A. Areas to investigate for poor adhesion or performance include:
Check for surface contamination. The substrates must be clean and free of any contaminant. This is the most common cause of poor adhesion.
Check for surface match. Are the two surfaces to be bonded a good match?
Check for proper application pressure and wet-out.
Check the back of the component for flatness.
Check the installation process for proper procedures.
