Audited Supplier
NFT115
Engineers Available to Service Machinery Overseas
2years
Flour Mill
Flour, All, Beans, Wheat, Rice flour
380V
Horizontal
New
Customized
11kw
1000-1500kg/Hour
Dehulling/Polishing/Degermination
240kg
Corn,Sorghum,Wheat,Rice
Dehulled Corn Kernel,Rice,Sorghum,Wheat
AGRISE
Wooden Case or Easy Package
1050*1020*1150mm
China
8437800
Product Description
1000-1500kg per hour Hotsale Iron Roller Maize degeminator Corn polishing machine
The NF series of debugging-free air-jet Corn degeminator machine are carefully designed by our company's scientific and technical personnel on the basis of the original iron roller rice mill through extensive market research. We could also call it "corn polisher","corn peeling machine","corn hulling machine". The corn degeminator could remove corn skin and corn germ to get big corn kernels for further corn processing in small scale corn mills. The germs could be separated and collected through our other corn germ extractor machine if required. The maize degeminator can be used as a stand-alone machine, or as a supporting equipment for a combination corn hulling and milling machine or a complete set of corn or posho mills. At the same time, because the fine bran is collected by the bran collector, the working environment is clean and the dust concentration is low.
Stucture of Maize dehulling Corn degeminator machine
The Corn degeminator is mainly composed of a hopper, a main shaft, a grinding roller, a screw propeller, a milling chamber, a turbine box, a rear seat, a base, etc. The structure is shown in below.
Working principle of Maize dehulling machine maize polisher
After the raw grain enters the hopper, it advances along the shaft under the action of the screw propeller, and enters the corn degeminator chamber. Due to the resistance of the outlet pressure door, pressure is generated between the corn grains and rubbed against each other under the action of the roll ribs. The corn grains reach the required precision. Then it flows out from the corn kernel outlet. At the same time, the high-pressure wind generated by the high-pressure fan is sprayed into the corn degeminating chamber through the gap of the corn grinding roll, which strengthens the whitening effect of the corn kernel and takes away part of the heat generated during the corn milling process. Under the action, it is discharged out of the machine and collected by the collector to obtain bright and clean low-temperature finished corn kernels.
Features of NF series of Corn degeminator machine
The NF series of debugging-free air-jet Corn degeminator machine are carefully designed by our company's scientific and technical personnel on the basis of the original iron roller rice mill through extensive market research. We could also call it "corn polisher","corn peeling machine","corn hulling machine". The corn degeminator could remove corn skin and corn germ to get big corn kernels for further corn processing in small scale corn mills. The germs could be separated and collected through our other corn germ extractor machine if required. The maize degeminator can be used as a stand-alone machine, or as a supporting equipment for a combination corn hulling and milling machine or a complete set of corn or posho mills. At the same time, because the fine bran is collected by the bran collector, the working environment is clean and the dust concentration is low.
Stucture of Maize dehulling Corn degeminator machine
The Corn degeminator is mainly composed of a hopper, a main shaft, a grinding roller, a screw propeller, a milling chamber, a turbine box, a rear seat, a base, etc. The structure is shown in below.
| 1. Main shaft pulley | 2. Bearing | 3. Hopper | 4. Bearing gland |
| 5. Screw propeller | 6. Bushing | 7. Large gear ring | 8. Hulling chamber frame |
| 9. Rice sieve frame | 10 meters sieve | 12. Rice roller | 13. Rice outlet |
| 14. Screw plug | 15. Separation chamber | 16. Pinion | 17. Chaff suction device |
| 18. Front seat | 19. Turbine box | 20. Base | 21. Air jet impeller |
| 22. Rear seat | 23. Air jet bearing seat | 24. Fan pulley | 25. Tightening bushing |
Working principle of Maize dehulling machine maize polisher
After the raw grain enters the hopper, it advances along the shaft under the action of the screw propeller, and enters the corn degeminator chamber. Due to the resistance of the outlet pressure door, pressure is generated between the corn grains and rubbed against each other under the action of the roll ribs. The corn grains reach the required precision. Then it flows out from the corn kernel outlet. At the same time, the high-pressure wind generated by the high-pressure fan is sprayed into the corn degeminating chamber through the gap of the corn grinding roll, which strengthens the whitening effect of the corn kernel and takes away part of the heat generated during the corn milling process. Under the action, it is discharged out of the machine and collected by the collector to obtain bright and clean low-temperature finished corn kernels.
Features of NF series of Corn degeminator machine
- Affordable price suitable for new small to medium scale posho mill starters
- Simple and beautiful in appearance
- convenience in operation and maintenance
- lower chamber temperature during working to ensure final corn products quality
- Durable structure with longer use life
| Type | Capacity (kg/h) | Power (kw) | Spindle speed (r/min) | Blower speed (r/min) | Weight (kg) | Dimension (mm) |
| NF90 | 300-500 | 3-7.5 | 940-1000 | 4200-4400 | 120-180 | 1000x400x1200 |
| NF115 | 1000-1500 | 11-15 | 940-1000 | 4200-4400 | 240 | 1050*1020*1150 |
| NF150 | 1500-2000 | 18.5-22 | 940-1000 | 3000-3050 | 320 | 1189*1020*1430 |
WELCOME TO CONTACT US FOR MORE INFORMATION
