Audited Supplier
MBF40-10N
ISO
Vertical
Industrial
Electric Holding Furnace
Ceramic Sintering
Electric
Air
330*200*660mm(W*H*D)
Chitherm
Wooden Packaging
1150*1970*1460mm(W*H*D)
China
8514101000
Product Description
1. Applications:
Mainly used for electronic components, ceramic filters in high temperature binder burn off and sintering process.2. Mainly Specifics:
- Rated Temp.: 850ºC
- Max Temp.: 1000ºC
- Effective Dimensions: 330 × 200 × 660mm(W×H×D)
- Heating Method: SiC Rods
- Process Atmosphere: Air
- Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
- Temperature Uniformity: better than ±5ºC (insulation 2 hours at 850ºC test)
- Thermocouple: Type N
- Heating Method:ceramic tube-encased silicon carbide rod
- Temperature control points: 3 points.
- Process Steps: 9 steps
- Oxygen Content Detection: Configure a micro-oxygen analyzer to monitor the oxygen content inside the furnace chamber in real time.
- Exhaust: One exhaust port with manual adjustment
- Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection, over temperature heating power will turn off automatically
- Max Heating Power: 25kW.
- Surface Temperature Rise: ≤ 40ºC.
- Furnace Dimensions: about 1150*1970*1460mm (W×H×D);
- Appearance Color: light gray
1. - Furnace frame
2. - Chimney
3. - Furnace chamber
4. - Furnace door
5. - Heating element
6. - Sagger (a type of ceramic container used in kilns)
7. - Roller bar (used in kilns for moving ceramics during the firing process)
| 3. Delivery List | |||
| Item | Note | QTY | |
| Basic Compositions | Furnace | 1 PC | |
| Certificates of Inspection | Furnace and major purchased components | 1 Set | |
| Technical Documents | Furnace specifications, technical documents of major purchased components, etc | 1 Set | |
| Key Parts | Heating Elements | ceramic tube-encased silicon carbide rod | 1 Set |
| Temperature Controller | Azbil | 1 Set | |
| touch screen | 1 Set | ||
| Spares | silicon carbide rod | 1 PC | |
4. Facility Requirements
1 .Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
2 .Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 4 - 12m3 /h.
3 .Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 15m3 /h;
4 .Power conditions: capacity greater than 35kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
5 .Installation site: 2500mm×2000mm×3000mm (W×H×D), installation area greater than 5m2.
