Audited Supplier
ACEY-HRCDS-100V100A
Provided
Finished Batteries Tester
All
Test Capacity Voltage Current
Battery Charge Discharge Test Equipment
Online Support
Li-ion/Lead-Acid/Ni-CD/NiMH Battery and So on
ACEY
Plywood Case Packing
China
Product Description
100V 100A Regenerative Battery Pack Test System Battery Charge Discharge Test Equipment
Application and Function
100V 100A Battery Charge Discharge Test Equipment is mainly used for circle life testing and quality control of li-ion battery, lead-acid battery, Ni-Cd battery, NiMH battery and so on in production line or in lab.
Support battery circle life testing, capacity testing, charging characteristic testing, discharging characteristic testing, charge retention capability testing, charge and discharge efficiency testing, over charge or over discharge rate affordability testing.
Equipment configuration list
| No. | Category | Product name | Product model | Quantity | Remarks |
| 1 | Test equipment | Charge and discharge test equipment | ACEY-HRCDS-100V100A | 4CHS | |
| 2 | Cabinet | Charging and discharging equipment cabinet | / | 1PCS | Default without power input line |
| 3 | Computer | Computer | Dell computer I5-10500 processor / 16G memory / 256G solid state + 1T hard disk / 3 network port | 1PCS | Optional, including mouse, keyboard and 19 inch AOC displayer |
| 4 | Accessories | Charge discharge test line | / | 4PCS | Each channel has a set of test lines with a length of 3.5meters.(including fixture) |
| 5 | Accessories | BMS power supply | 12V/24V | 2 | Optional, 2 channels for each power supply |
| 6 | Accessories | Switch | TP-LINK TL-SF1008VE | 1PCS | |
| 7 | Accessories | Communication accessories | Communication line / Crystal head, etc. | Several | For communication |
| 8 | Accessories | USB Flash Drive | 16G | 1PCS | Contains Test software etc. |
| 9 | Accessories | File | / | 1PCS | Test report, packing list, etc |
Working Environment and Technical Parameters
- Power supply of the whole cabinet: AC 380V±10%, frequency: 50HZ±5%.
- Maximum input power of the whole cabinet: 44.4 kW (4CHS)
- Working temperature: 0~ 45.
- Humidity: less than ≤ 85%R.H (non-condensing).
- No severe shake, no corrosive gases, no flammable or explosive gases around.
- Resolution: AD 16 bit.
| No. | Item | ACEY-HRCDS-100V100A | ||
| 1 | Main channels | 1CH/ module | ||
| 2 | Output power | The maximum power of channel operation is 10kW; timeless | ||
| 3 | Output power stability | ±0.1%FS | ||
| 4 | Power quality at input side | Power factor | >99%(full load) | |
| Total harmonic distortion rate | ≤5%(full load) | |||
| 5 | Energy consumption parameters | Standard sine wave feedback energy, high efficiency (optimal efficiency 90%%) | ||
| 6 | Main channel working mode | Charge: CC, CV, CCCV, no voltage or current impact when CC transfer to CV | ||
| Discharge: CD, CP, CR | ||||
| Still | ||||
| Working condition test; Pulse test. | ||||
Q1:How to order?A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
