Audited Supplier
Fruit and Vegetable, Flowers, Special Crops, Leafy, Fruit, Seedling, Growth
IP67
Red and Blue
85V-265V
100W
Square
3 Years
Aluminum
50000h
Three Ann
CE, RoHS, CCC, GS, FCC
1200K
40umol/M2*S
Besturn
Carton
490*410*285mm
China
94054090
Product Description
Product
Protuct features
·The LED plant lamp has low heat, can be close to the plant to fill the light, does not cause the burn, in order to reduce the leakage of light loss to the greatest extent and improve the luminous effect.
·According to the needs of plants in different growth periods, the combination LED spectrum can obtain pure monochromatic light or compound wavelength for light supplement, which promotes plant growth, flowering and results.
·Small size, long life, high bioenergy efficiency, energy saving and environmental protection, and no heavy metal pollution after damage.
·The physiological effective radiation energy of 10W LED plant lamp is equivalent to 100W of HPS, saving about 90% of electric energy compared with traditional lighting lamp, reducing the cost of light supplement and significant economic benefit.
Usage Tips
sage Tips
Recommended lighting time and height :
Seedling Stage: 16-18 hours on, 36-59inch.
Vegetative Stage :12-16 hours on , 18-36inch.
Flowering Stage : 10-12 hours on, 12-18inch
The lighting time and height can be adjusted Accor-
ding to the site environment and specific plant plants.
Note
1.Can be used indoor and outdoor ;
2.Before installation, please cut off the power supply to prevent electric shock, and avoid touching the surface of the lamp by hand while working;
3.Make sure that the product is used in a normal environment when used;
4.Avoid installing in area where is heat source and hot steam, corrosive gas, so as not to affect life;
5.Make sure the installation position can withstand 10 times the weight of the product before installation.
6.Installing on Where there is no vibration, no sway, no fire hazard7;
8.Do not touch or knock when it works.
Warranty
We offer 3 years warranty for this light . If any issues , please contact us first and we will assist to make everything right.
Our Company
Yangzhou Besturn International Trade Co.,Ltd. was established in 2007, mainly exported lighting products. And in 2012 established a R&D center in HK, at same time, it invested in local factory and build it's own production bases in Shenzhen, Guangzhou, Ningbo and Yangzhou.
Our LED products now widely exported to Europe, Mid-East, North American & South American. Our main product has pass CE, Rohs, UL, ETL... Quality first is always our aim.
Why Choose US
1. For all your inquires about us or our products, we will reply you in details within 24 hours.
2. We own well-tranied and passional sales & after- sale services who can speak fluent Engligh language.
3. We offer OEM services. Can print your own logo on product , can customize the retail box packing and other things.
4. Shipping port: Shenzhen, China mainland.
5. Discouts are offered based on order quantities.
Engineering example
FAQ
1.Question : Are you a factory or trading company ?
Answer: We are an SGS recognized OEM / ODM manufacturer factory with export license. We have an outstanding and experienced team made up of "A" player who have a passion for doing something great to create more value for customers world-wide.
2. Question : Why choose cooperate with us ?
Answer : -- Right people, Right product, Right price ;
-- Company-wide customer awareness ;
-- Reliable Quality and All components from world leading suppliers ;
-- Cost-effective export infrastructure and total supply chain management ;
3. Question : How does your factory do regarding quality control ?
Answer : Assuring Quality is our dignity and quality control engineers specially be responsible for quality checking in each process such as Incoming Quality Control , In Process Quality Control , Outgoing Quality Control , Environment Control, Product Traceability System , Internal Audits & Calibration, Equipment Control & Maintenance , Control of Non-Conforming Materials and etc.
4. Question : What is the average delivery time ?
Answer : Most of the time, it would be around 1 week since after confirm receiving customers' contract money. For mass production purchase order at big quantity, the delivery time could be discussed with each other case by case.
Protuct features
·The LED plant lamp has low heat, can be close to the plant to fill the light, does not cause the burn, in order to reduce the leakage of light loss to the greatest extent and improve the luminous effect.
·According to the needs of plants in different growth periods, the combination LED spectrum can obtain pure monochromatic light or compound wavelength for light supplement, which promotes plant growth, flowering and results.
·Small size, long life, high bioenergy efficiency, energy saving and environmental protection, and no heavy metal pollution after damage.
·The physiological effective radiation energy of 10W LED plant lamp is equivalent to 100W of HPS, saving about 90% of electric energy compared with traditional lighting lamp, reducing the cost of light supplement and significant economic benefit.
Usage Tips
sage Tips
Recommended lighting time and height :
Seedling Stage: 16-18 hours on, 36-59inch.
Vegetative Stage :12-16 hours on , 18-36inch.
Flowering Stage : 10-12 hours on, 12-18inch
The lighting time and height can be adjusted Accor-
ding to the site environment and specific plant plants.
Note
1.Can be used indoor and outdoor ;
2.Before installation, please cut off the power supply to prevent electric shock, and avoid touching the surface of the lamp by hand while working;
3.Make sure that the product is used in a normal environment when used;
4.Avoid installing in area where is heat source and hot steam, corrosive gas, so as not to affect life;
5.Make sure the installation position can withstand 10 times the weight of the product before installation.
6.Installing on Where there is no vibration, no sway, no fire hazard7;
8.Do not touch or knock when it works.
Warranty
We offer 3 years warranty for this light . If any issues , please contact us first and we will assist to make everything right.
Our Company
Yangzhou Besturn International Trade Co.,Ltd. was established in 2007, mainly exported lighting products. And in 2012 established a R&D center in HK, at same time, it invested in local factory and build it's own production bases in Shenzhen, Guangzhou, Ningbo and Yangzhou.
Our LED products now widely exported to Europe, Mid-East, North American & South American. Our main product has pass CE, Rohs, UL, ETL... Quality first is always our aim.
Why Choose US
1. For all your inquires about us or our products, we will reply you in details within 24 hours.
2. We own well-tranied and passional sales & after- sale services who can speak fluent Engligh language.
3. We offer OEM services. Can print your own logo on product , can customize the retail box packing and other things.
4. Shipping port: Shenzhen, China mainland.
5. Discouts are offered based on order quantities.
Engineering example
FAQ
1.Question : Are you a factory or trading company ?
Answer: We are an SGS recognized OEM / ODM manufacturer factory with export license. We have an outstanding and experienced team made up of "A" player who have a passion for doing something great to create more value for customers world-wide.
2. Question : Why choose cooperate with us ?
Answer : -- Right people, Right product, Right price ;
-- Company-wide customer awareness ;
-- Reliable Quality and All components from world leading suppliers ;
-- Cost-effective export infrastructure and total supply chain management ;
3. Question : How does your factory do regarding quality control ?
Answer : Assuring Quality is our dignity and quality control engineers specially be responsible for quality checking in each process such as Incoming Quality Control , In Process Quality Control , Outgoing Quality Control , Environment Control, Product Traceability System , Internal Audits & Calibration, Equipment Control & Maintenance , Control of Non-Conforming Materials and etc.
4. Question : What is the average delivery time ?
Answer : Most of the time, it would be around 1 week since after confirm receiving customers' contract money. For mass production purchase order at big quantity, the delivery time could be discussed with each other case by case.
