Audited Supplier
115/230RT10AL-02
Adjust
Open-Loop
Continuous
Automatic Control, Protection, Monitoring
ISO: 9001, CE
New
Customized
Aluminum Alloy
Speed Mode
AC 115V/230V
450W/1000W
0-5V Potentiometer
keya
Carton
116*103*48 mm
China
9032899090
Product Description
115/230VDC Reversible Regen DC Motor Controller
MMT-115/230DR Series DC motor driver is a kind of speed governing product developed and produced by adopting past successful experience and combining modern advanced technology. This series of products have met international standard requirements and are sold to many countries. This driver adopts thyristor chopping control principle and uses independent trigger mode. Even there is no velocity feedback, high speed ratio can be achieved to make it more accurate and reliable.
Excellent performance, reliable quality and high cost performance make it a strong performer in DC motor driver field and it was widely used in plastic machinery, food machinery, cable equipment, machining, paper printing, testing equipment, laboratory equipment and mixing equipment, etc.
Excellent performance, reliable quality and high cost performance make it a strong performer in DC motor driver field and it was widely used in plastic machinery, food machinery, cable equipment, machining, paper printing, testing equipment, laboratory equipment and mixing equipment, etc.
Product characteristics
1. SMT technology, small size
2. Good following features, rapid respond speed
3. Wide speed ratio, strong mechanical features
4. Applicable to permanent magnet ,separate excitation type and DC torque motor
5. Double closed-loop PI regulation (Voltage, current)
6. Current setting and current-limiting protection (continuous operation setting current)
7. Large low speed output moment
8. Over-current protection function
9. Quick stop function
10. Arbitrary setting of upper and lower speed
11. Soft start, soft stop setting function
12. Selection of speed mode, torque mode
13. Normally open, close selection of enable signal
14. Selection of input, output voltage switch
15.Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer
2.Wide speed governing range (0-MAX SPD setting value)
3.Rapid dynamic response process
4.Automatic smooth transition process during speed up and cut.
5.Good excavation features which automatically limit over-current within the range of set value.
6.High reliability, compact structure, extremely high cost performance
2. Good following features, rapid respond speed
3. Wide speed ratio, strong mechanical features
4. Applicable to permanent magnet ,separate excitation type and DC torque motor
5. Double closed-loop PI regulation (Voltage, current)
6. Current setting and current-limiting protection (continuous operation setting current)
7. Large low speed output moment
8. Over-current protection function
9. Quick stop function
10. Arbitrary setting of upper and lower speed
11. Soft start, soft stop setting function
12. Selection of speed mode, torque mode
13. Normally open, close selection of enable signal
14. Selection of input, output voltage switch
15.Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer
Product performance
1.Strong mechanical features, static rate is 1%.2.Wide speed governing range (0-MAX SPD setting value)
3.Rapid dynamic response process
4.Automatic smooth transition process during speed up and cut.
5.Good excavation features which automatically limit over-current within the range of set value.
6.High reliability, compact structure, extremely high cost performance
| Model | 115/230DR10AL-02 |
| Operating Voltage | AC 115V/230V |
| Ultimate Supply Voltage | AC 115.220V |
| Adaptable Motor Power | 450W/1000W |
| Rated Speed | 10A |
| Instaneous Max. Current | 30A |
| Overcurrent Time | 0.1s over-current protection |
| Working Mode | Speed Mode |
| Control Method | 0-5v, potentionmeter |
| Controllable Speed Range | 0-Max speed |
| Dimension | 116*103*48mm |
| Weight | 0.45kg |
| Cooling Method | Natural Cooling |
| Operating Temperature | -25ºC-+60ºC |
| Storage Temperature | -35ºC-+65ºC |
| Insulating Properties | The output and input are insulated to DC 600Vfrom the chassis,leakage current is0.007mA, insulation resisitance is above 20MΩ. |
| Protective Properties | Dust-proof, Moisture-proof, Salt Spray-proof |
| Protective Function | Abnormalitise like over current, overheating, over voltage, less voltage and short circuit will start the protection function. |
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory | Help instal and use the product 24 hours online problem solving |
☆Standard export carton with sponge
☆ Size : base on the order
☆ Weight : base on the order
☆ Detail data will be confirmed before shipping
☆ Size : base on the order
☆ Weight : base on the order
☆ Detail data will be confirmed before shipping
