11kv Shunt Capacitor and Filter Capacitor

Shunt capacitor and filter capacitor

 

standard
IEC 60871
GB/T11024
DL/T840
ISO9001
Other standards available upon request

Features
1. Operating performance of concealed internal fuse has reached internationally advanced level.
2. The electrode plate adopts the design of protruding folded aluminum foil, so as to improve the electric field distribution.
3. Internal discharge resistor can eliminate internal DC voltage and suppress the arc produced by fuse action.
4. Integrated crimped bushing requires no welding, and can effectively prevent leakage in any part of the bushing.
5. Non-PCB insulating oil with anti-aging and refining technology makes the service life of capacitor effectively improved. The capacitor has reached international advanced level.

Performance parameters
. Loss angle tangent (Tan δ) of all-film capacitor is less than 0.0003 (including the loss of
internal fuse and discharge resistor).
2. High insulation margin. The capacitor can be running under 1.2 times rated voltage with
high reliability.
3. The capacitance deviation of a capacitor unit does not exceed -4%~+4% between the
measured value and its rated value.
4. Internal discharge resistors (if any) can reduce residual voltage from UN to below 50V
after 10min when power supply is cut off.
4. Internal fuse in the capacitor can act reliably when the components are broken down under the voltage ranging from 0.5UN~3.0UN. Please consult us in case of any special requirements.