Audited Supplier
12/24/48/96/144cores LC/SC/FC to MPO/MTP Patch Cable for Data Center Solution
Highlights
Please note: The US Conec MTP® connectors are fully compliant with the MPO standards, achieving higher performance levels when compared to generic MPO connectors.
- 8 Fibers used for 40G QSFP+ SR4 direct connect applications.
- Streamline network cabling in high-density data centers.
- Allow for increased capacity and ease of cable management.
US Conec MTP connector features the industry's highest-precision thermoplastic ferrule, designed to 0.35dB Max. IL.
Corning Clear Curve OM3 Fiber
Corning ClearCurve multimode fiber is designed to withstand tight bends and challenging cabling routes with substantially less signal loss than conventional multimode fiber.
Plenum Rated Outer Jacket
Plenum cables are purposefully built with jacket materials that give off low amounts of smoke and retard flames spread, making sure the cables are safe and heat-resistant.
7.5mm Minimum Bend Radius
With BIF, our cable is designed for improved bend performance in reduced-radius applications such as residential or office environments which have less bend sensitivity.
Test Assured Program3D interferometer provides verification of MTP/MPO polishing process, and making all parameters of the polished MT ferrule complies and exceeds industry standards. Clean optical connectors are paramount in providing a reliable, high-performance fiber optic infrastructure.
Applications:Asynchronous Transmission Mode(ATM)
Gigabit Ethernet
Active Device/Transceiver Interface
CATV, Video and Multimedia
Premise Installations
Telecommunication Networks
Parallel optical interconnects between PC Cards and patch panels
Interconnection for O/E modules
Optical Switch interframe connections
Features:
Precision molded MT ferrule
High precision guide pins for exact alignment
Compact design, up to 4,8,12,24 fibers
IEC 61754-7 Compliant
EIA/TIA-604-5 Compliant
Product Specifications
| Connector A | LC,SC,ST,FC....... | Connector B | MPO/MTP |
| Fiber Mode | SM(G652,G655,G657);MM(OM1-OM5) 50/125μm | Wavelength | SM: 1310/1550nm MM: 850/1300nm |
| Polish Type | PC,UPC and APC | Minimum Bend Radius | 7.5mm |
| Insertion Loss | Standard:≤0.35/0.7dB(Typical/Max) Low Loss:≤0.2/0.35dB(Typical/Max) | Return Loss | SM:APC:60dB MM:PC:25dB |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Jacket OD | 3.0mm | Cable Jacket | PVC,LSZH |
| Installation Tensile Load | 100 N | Long-Term Tensile Load | 50 N |
| Operating Temperature | -20°C to +70°C | Storage Temperature | -40°C to +80°C |
How to order Optical fiber patch cord?
1. Connector type : SC / FC / LC / ST / MPO / MTP / MU / MTRJ / E2000 / SMA
2. Mode type : single mode ( UPC and APC ) / multi mode ( PC )
3. Cable diameter : 0.9 / 2.0 / 3.0 mm ( can customized other diameter )
4. Coating material : PVC / LSZH
5. fiber count : simple / duplex / 4 core / 6core / 8 core /12 core / 24core/48 core / 96 core and so on
6. Cable type : G652D / G657A1 / G657A2 /G655 / OM1 / OM2 / OM3-150 / OM3-300 / OM4 /OM5
7. Patch cord length : according to your requirement
8.MPO/MTP connector should let us know which method ( A type / B type /C type ), male or female , fiber count (4/8/12/16/24/32 fiber )
9.Insertion/ Return Loss:Standard/Low Loss
10.Type:Pigtail/Patch Cord/LGX Box/Patch Panel
OUR FACTORY/CERTIFICATE:
