Audited Supplier
DMY-III-300C
Gas
Ordinary Temperature
Electric
Thread
Pilot Operated
Aluminum
Low Pressure
Pilot Membrane Structure
AC220V/AC110V/DC24V
Dust Cleaning
ANSI
Industrial Usage
Rotating Arm Baghouse
CE
XIE CHANG
Carton Box
12"
China
Product Description
1. Pulse valve used for rotating cleaning baghouse
2. Garlock membrane used
3. ISO9001:2015/CE certified
4. World-class diaphragms
Pulse Valve Introduction
With the standard of dust emission from the power industry being further enhanced, high-efficiency baghouse filter has been widely promoted and used in power plant industry.
Presently, the long-arm rotating baghouse is polularly used in power industry, the feature of which is suitable for the dust wind with high air volume, small wokload of maintenance, high blow volume, low pressure and energy saving, etc. The heart part system of pulse valve is usually imported from abroad the 8" Pulse Valve while the most of Pulse Valve produced domestically is at most 3" which can not meet the requirement of high blow jetting volume. To satisfy the high speed development of APC requirement, we have developed 8", 10", 12", 14" and 16" low pressure pulse valve. After the experimental test, all the performance have reached the foreign standard. Welcome the users to select.
Working Principle
The low pressure large-orifice pulse valve stop working by the differential pressure between the both sides of diaphragm. The pilot head of Pulse Valve open the balancing holes with time of pulse duration ( 0.15-0.3s). The airflow in the high pressure area of diaphragm will be released so that the diaphragm will be holded up and the Pulse Valve start cleaning.
Technical Parameters
>Pulse Valve Working pressure:0.05~0.1Mpa
>Pulse Valve Working medium:clean air
>Pulse Valve Voltage:DC24V(AC220V/50Hz)
>Pulse Valve Current:0.8A(0.05A)
>Used environment:
Temperature:-40°C~130°C
The relative humidity of air is no more than 85%
2. Garlock membrane used
3. ISO9001:2015/CE certified
4. World-class diaphragms
Pulse Valve Introduction
With the standard of dust emission from the power industry being further enhanced, high-efficiency baghouse filter has been widely promoted and used in power plant industry.
Presently, the long-arm rotating baghouse is polularly used in power industry, the feature of which is suitable for the dust wind with high air volume, small wokload of maintenance, high blow volume, low pressure and energy saving, etc. The heart part system of pulse valve is usually imported from abroad the 8" Pulse Valve while the most of Pulse Valve produced domestically is at most 3" which can not meet the requirement of high blow jetting volume. To satisfy the high speed development of APC requirement, we have developed 8", 10", 12", 14" and 16" low pressure pulse valve. After the experimental test, all the performance have reached the foreign standard. Welcome the users to select.
Working Principle
The low pressure large-orifice pulse valve stop working by the differential pressure between the both sides of diaphragm. The pilot head of Pulse Valve open the balancing holes with time of pulse duration ( 0.15-0.3s). The airflow in the high pressure area of diaphragm will be released so that the diaphragm will be holded up and the Pulse Valve start cleaning.
Technical Parameters
>Pulse Valve Working pressure:0.05~0.1Mpa
>Pulse Valve Working medium:clean air
>Pulse Valve Voltage:DC24V(AC220V/50Hz)
>Pulse Valve Current:0.8A(0.05A)
>Used environment:
Temperature:-40°C~130°C
The relative humidity of air is no more than 85%
