15-830 Thread Bar D15/17 Tie Rod with Hex Nut and Couplers Psb830

 

High Strength Screw Thread Bar
Handan Yidao Metal products co.,ltd, located in Handan city, Hebei Province, China.

High Strength Screw Thread Bar
Handan Yidao Metal products co.,ltd, located in Handan city, Hebei Province, China.

There are two large steel mills and thousands of fasteners factories.
We have experience in exporting  thread bars to over 35 countries around the world.

Handan Yidao metal products CO.LTD is a hot rolled screw thread bar manufacturer which can serve
(diameter from 15mm to 50mm,grade PSB830, PSB930, PSB1080)and all related 
accessories(anchor hex nut, bearing plate, domed nut, and coupler). 
In addition, handan yidao could produce fasteners such as bolts, nuts, screw rod and steel plates.
Our factory sells 3000MT thread bar and fasteners each month.

Tie rods/ Thread bars are used for soil nailing, formwork tie, tie back, tie 
rod, scoffolding, post tensioning system, geotechnical, mining and tunneling, etc.
We have launched new product D15/17 TIE ROD (diameter 15mm, yield strength>830MPA, tensile strength>1030MPA) for customers.

The length of the finished thread reinforcement is usually 9 m and 12 m.
the THREAD BAR diameter is from 15MM to 50MM
The grade of yield strength/ tensile strength/ post-fracture elongation is as follows:
PSB830, yield strength 830MPA, tensile strength 1030MPA, elongates after fracture 6%
PSB930, yield strength 930MPA, tensile strength 1080MPA, elongates after fracture 6%
PSB1080, yield strength 1080MPA, tensile strength 1230MPA, elongates after fracture 6%
There are no ribs on the threaded bar which means the hex nut or coupler can be used at any point.
We also serve corrosion protection like zinc galvanized and epoxy coating.

 

 

The length of the finished thread reinforcement is usually 9 m and 12 m.

The grade/yield strength/tensile strength/post-fracture elongation is as follows:

PSB930, yield strength 930MPA, tensile strength 1080MPA, elongation after fracture 6%

PSB830, yield strength 830MPA, tensile strength 1030MPA, elongation after fracture 6%

The thread steel bar has no rib, which can be screwed by hex nuts

our factory could design and produce thread bar accessories: hex nut, domed nut, bearing plate, coupler and spring.