Audited Supplier
YDN-GF-1000
1 Year Free Service and Life-Time Service
1 Year
AC Three Phase
Gas
CE, ISO
＞200kW
Standard
FAW
220/380V
1500/1800rpm
50/60Hz
CE ISO Saso
Ydn Power
Electric Start
1000kw for 24 Hours
YDNPOWER
for Open Type, Packing with Plywood Case; for Sile
Gas generator
Weifang China
8502204000
Product Description
1500KW parallel operation of FAW natural gas generator
| Model | YDN-GF-1500 | |
| Rated power (kW/KVA) | 250/312.5 | |
| Rated current (A) | 450 | |
| container type Size (mm) | 6000*2500*2750 | |
| Weight (kg) | 6500 | |
| Engine | Model | FAW CA6SM3 |
| Type | Water-cooled, 4-stroke,6 cylinder in-line | |
| Rated Power(kW/KVA) | 290 | |
| Rated Speed(rpm) | 1500 | |
| Cylinder No. | 6 | |
| Bore*Stroke(mm) | 126.5×166 | |
| Cooling Method | Water-cooled | |
| Oil Consumption(g/KWH) | 1 | |
| Oil Capacity(L) | 35 | |
| Cooling Water Capacity(L) | 110 | |
| Gas Consumption(kWh/m3) | ≤0.33 | |
| Starting method | 24V DC | |
| Alternator | Brand | Farrand |
| Model | FLD250 | |
| Rated Power(kW/KVA) | 250/312.5 | |
| Efficiency | 92.5% | |
| Voltage Regulation | <=±1 | |
| Excitation mode | Brushless, Self Excitation | |
| Insulation Class | H | |
| Control System | Model | SMARTGEN HGM6110N |
| Working Voltage | DC8.0V to DC35.0V | |
| Overall Dimensions | 197 mm x 152 mm x 47mm | |
| Panel Cutout | 186mm x 141mm | |
| Working Condition | Temperature: (-25~70)ºC; Humidity: (20~90)% | |
| Weight | 0.56kg | |
| Special notes: The definition of generator power is as follows: Rated Power (PRP): 1. The running time is unlimited every year. 2. In a 250 hours continuous period, the average load rate should not exceed 70% . | ||
The paralleling 1MW power station plan please contact us
Requirements for natural gas:
- The methane content should not be lower than 95%.
- The gas temperature should be between 0-40 ºC.
- No impurity should be in the gas. Water in the gas should be less than 20g/Nm3.
- Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
- Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary, and pressure relief device should be added if the value is higher than 100KPA;
- The gas should be dehydrated and desulfurized. Make sure that there is no liquid in the gas. H2S<200mg/Nm3.
