150*24.5mm Easyclean Holo/Solid High Satisfaction Hot Sales 3D Wood Grain Pattern WPC Wood Plastic Composite Decking for Exterior Garden Park Ground Et9375e

Company 


Packing & Loading 



WHAT IS THE ECOTECHWOOD WPC ? 

ECOTECHWOOD WPC  is a green buidling material, it's made of 60% first grade natural wood fiber( Professionally Dry treatment ) ,30% of eco-friendly  & first rectcled HDPE materials and 10% Chemical additivel ( antiUV agent, antioxidation agent, reinforcing agent, stabilizers, colorrants, anti-fungus agent, coupling agent ect..). 




 ECOTECHWOOD WPC FEATHURES 
1. 100% recyclable ,Eco-friendly ,saving forest resources 
2. With the look of the natural wood but no timber problems
3. Waterproof ,no rotten ,proven under salt water condition etc.
4.Barefoot friendly ,Anti-skidding ,no cracking ,no warping 
5. No painting , no glue , low maintenance
6. Weather resistant , suitable from  -45°C to 80°C 
7.Insects restance and moldy -proof 
8.Available in different colores
9.Easy to Install and Clean  
10 . Life time more than 15 years 




How to clean and maintentance the WPC decking ? 
1. Scratch  
  Slight Scratch didn't matter a lot to the appearance of decking . A lisght metal brishing or medium sanding paper can be used if you insisted on removing such scratch .

2. General Dirt & Debris 
  The affacted area should be sprayed off with a hose to remove surface debris . Use warm soapy water and a soft bristle brush to remove dirt and debris from the embossing pattern .

3. Ice & Snow 
 A plastic shovel may be used to remove snow from the deck .Use Calcium ,chloride or rock salt to melt the snow and ice from the deck surface .

4. Oil /Grease/Food 
    All food spills should be removed as soon as possible . The surface must be cleaned within seven days to maintain the stain warranty . To remove , spray off with a hose and use warm,soapy water and soft bristle brush to remove spills from embossig pattern .

5.Mold & Mildew 
  If debris such as pollen and dirt is allowed to remain on the deck surface ,mold can freed on the bio film .Using a hose and warm soapy water with a soft bristle brush is recommended to remove the food source and mold .

6. Water Stain
    Water stain may happen after heavy rains , this is because of wood content of  WPC materials . 
    When notice the stain ,wipe the stain by cloth with warm soap water in sunny weather will help remove the stain.