Audited Supplier
HPA-G52(3600-3800MHz)
Amplify RF Signal
Pull Core
New
RoHS, ISO, CE
12 Months
Manual
It Depends
Electric
300,000-1,000,000 Shots
3600-3800mh
150W
50dB
28VDC
Yonlit
Carton by Air
180*140*25mm
China
8501510010
Product Description
5G Power Amplifier 3600-3800 150w Design for Drone Jammer
Frequency Range: 3600-3800MHz
Small Signal Gain: ≥50dB
In-Band Ripple : < ± 1.5dB
Input Signal Range: 5-15dBm
RF Output Power: ≥52dBm
Gain Adjust Range: 0-31dB, 1dB Step
RF IN VSWR: <1.5
RF OUT VSWR: <1.5
Working Voltage 28VDC
Working Current: <15A
Power Connector: 2W2-Male
RF IN Port: 50 Ohms, SMA-Female
RF OUT Port: 50 Ohms, N-Female
Dimension : 180x140x25mm ( Exclusive Connector)
Working Temperature: -25 to 65ºC
Protection: Shutdown more than 75ºC, auto-restart less than 50ºC
Shutdown over High-VSWR, auto-restart after 30s
DB15 I/O Port (Standard)
PIN1: 1dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN2:2dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN3:4dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN4: 8dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN5:16dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN6: Indictor for Current Values
PIN7: V/L (Reflected RF Power, Max voltage, 3.3V; 0.1V/1dBm @25ºC )
PIN10:P/L (Output RF Power; Max voltage,3.3V; 0.1V/1dBm @25ºC)
PIN11: LE: High Level(5V) or hang in air:: OFF; Low Level(0V) ON
PIN12: Alarm over High-Temperature (80+/-2ºC) and shutdown, Auto Restart @ 55ºC+/-2ºC
PIN13: Alarm over High-VSWR, Auto-restart after 30s.
PIN14: T/L Temperature Monitor = 0.01*Tc(ºC)+0.5 (V) (Tc=Case temperature)
PIN15: GND
Frequency Range: 3600-3800MHz
Small Signal Gain: ≥50dB
In-Band Ripple : < ± 1.5dB
Input Signal Range: 5-15dBm
RF Output Power: ≥52dBm
Gain Adjust Range: 0-31dB, 1dB Step
RF IN VSWR: <1.5
RF OUT VSWR: <1.5
Working Voltage 28VDC
Working Current: <15A
Power Connector: 2W2-Male
RF IN Port: 50 Ohms, SMA-Female
RF OUT Port: 50 Ohms, N-Female
Dimension : 180x140x25mm ( Exclusive Connector)
Working Temperature: -25 to 65ºC
Protection: Shutdown more than 75ºC, auto-restart less than 50ºC
Shutdown over High-VSWR, auto-restart after 30s
DB15 I/O Port (Standard)
PIN1: 1dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN2:2dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN3:4dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN4: 8dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN5:16dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: Enable ATT)
PIN6: Indictor for Current Values
PIN7: V/L (Reflected RF Power, Max voltage, 3.3V; 0.1V/1dBm @25ºC )
PIN10:P/L (Output RF Power; Max voltage,3.3V; 0.1V/1dBm @25ºC)
PIN11: LE: High Level(5V) or hang in air:: OFF; Low Level(0V) ON
PIN12: Alarm over High-Temperature (80+/-2ºC) and shutdown, Auto Restart @ 55ºC+/-2ºC
PIN13: Alarm over High-VSWR, Auto-restart after 30s.
PIN14: T/L Temperature Monitor = 0.01*Tc(ºC)+0.5 (V) (Tc=Case temperature)
PIN15: GND
