0 445 010 704, High-pressure pump, Common Rail system BOSCH, 0445010704
Figure 1 Cutaway of Ford Supply Pump 0445010704 contains the Metering Unit 1810413
(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)

 

REPLACING PARTS:
ORDER NUMBER	DESIGNATION	CODE	POSITION	QUANTITY

OE information Check

 

1810413 Fuel Metering Valve for Fuel Supply Pump used on Humber/GMC/Chevrolet Made by Henshine

 

The Fuel Metering Valve 1810413 is generally installed at the inlet of the high-pressure fuel pump. It is a proportional solenoid valve, controlled by the electronic control unit (ECU), which can control the amount of oil entering the high-pressure fuel pump, thereby controlling the oil pressure in the common rail pipe. The good work of this component can not only ensure that the vehicle can run normally but also enable the engine to run in the most fuel-efficient state to achieve the effect of saving fuel.

2013-08-16

 

Fuel Metering Valve

1810413 Fuel Pressure Control Actuator for DACIA/ RENAULT/ FORD/ CITROEN/PEUGEOT/ FIAT

 

+Diesel Common Rail System/Fuel System

  -Components of High-pressure Pump/Fuel Supply Pump

   -IMV Valve/Fuel Pressure Regulating Valve; Fuel Metering Valve

 

Ningbo Henshine Precision Machinery Co., Ltd

 

Detailed Photo:

FIGURE 1 Side View of FROD Fuel Metering Valve 1810413

(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)

 

Figure 3 Bosch Metering Valve 1810413 Fitting on 0445010704| Henshine Precision Machinery
(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)

                Condition:                                 Brand NEW

                Manufacturer Part Number:    1810413

                Other Numbers:                       CITROEN/PEUGEOT/FIAT 9806448980

                Brand:                                       HENSHINE

                Material:                                    plastic, iron

                Delivery time:                           1-3days

                Colour:                                      Silver & Black

                Surface Finish:                         High Quality

                Placement on Vehicle:             CHEVROLET/GMC

                Type:                                          Fuel Pressure Regulator/ IMV

                Packing:                                    No 3/4 Natural Box & Henshine Box

                Warranty:                                  12 Months

                Min Order:                                 10 pcs

                Production Capacity:               86,230 pcs per month

                Means of Transport:                Ocean, Land, Air, Express

                Payments:                                 Visa, Mastercard, T/T, Online Transfer, Cash on pickup

                A fuel pressure regulator also named a suction control valve, or IMV Valve helps maintain the fuel pressure in the Fuel                    Injection System.
                If the fuel injection system needs more fuel pressure, the fuel pressure regulator releases more fuel to go to the engine.
                This is vital because that is how the fuel gets to the injectors.  Blocking the pass-through to the fuel tank off completely,
                the fuel pump will try to force too much fuel into the injectors which will cause them to fail and you will end up needing
                another auto repair service.

                As you could see, the pressure regulator plays a critical role in the common rail diesel injection system.

                A good factory, a good supplier with stable quality, and follows IATF16949 rules strictly. 

               After being tested by many of our customers in Europe and the Americas, this pressure regulator is a good replacement
               for OE diesel parts, like 1810413 Diesel Metering Valve.