
Product introduction:
The product is a submersible pump. The pump head operates underwater, driven by a rotating flexible shaft that transmits the torque from the drive unit to the pump head. Submersible operation of the pump head ensures that it is self priming and does not require suction hose.
The pump is designed with wide passages through the strainer, impeller and body to allow the unobstructed passage of solids. It is suitable for handling fluids with a high solid content such as sand, sludge, silt, effluent up to 60% in suspension, oil and water.
The pump is available with general purpose, abrasive resistant and chemical resistant pump head models. The pump should be selected with a model that best suits the most common applications.
| ENGLISH DESCRIPTION | FLEXIBLE SHAFT PUMP YHP 2" 6M | |
| HS CODE | 84137099.90 | |
| OUTLET SIZE | 2" | |
| REQUIRED SPEED FROM MOTOR/ENGINE | 3000 ~ 3600 RPM | |
| MAXIMUM DRAINAGE CAPACITY | 64.5m³/h | |
| MAXIMUM HEIGHT | 26m | |
| RUBBER HOSE OUTSIDE DIAMETER | 38mm | |
| HOSE LENGHT | 6m | |
| SHAFT DIAMETER | 15mm | |
| COUPLING TYPE | DYNAPACK TYPE | |
| COUPLING LOCK TYPE | SIDE PIN/PLUNGER | |
| PUMP HEAD MATERIAL | CAST ALUMINUM | CAST IRON |
| UNIT HEAD WEIGHT | 8KG | 11KG |
| UNIT TOTAL WEIGHT | 32KG | 35KG |
| CONTAINER QTY | 200 /600 | |
| COLOR SCHEME | ||
| PUMP | GRAY/BLUE/ORANGE | |
| RUBBER HOSE | BLACK | |
| MALE COUPLING | Yellow | |
DECALS | ||
| DECALS ARTWORK | LOGO PRINTED DIRECT ON RUBBER HOSE | |
Packing Methods: in carton box then on pallet or directly on pallet.


Other products:


Welcome to your specifica inquiry! We will reply you with more information.








Audited Supplier










