Audited Supplier
Whole machine line
Product Line
New
Automatic
Engineers Available to Service Machinery Overseas
Flexible
Assembly
Intelligent Manufacturing
Flow Production Line
Life Long
SGS
0 -45m/Min
8000K.N
Block Rolling/Single Sheet Rolling
15kw
6m
8m
Ø160X1300mm
CMT
Container
SGS
Jiangsu Suzhou
8455229090
Product Description
We can design the production line according to your requirements. The following data is just for your reference.
1. The main facilities of rolling mill and their functions
One cold rolling mill or one hot rolling mill is mainly equipped with down press device, frame assembly, roller device, transmission device, coiling machine and electrical control system.
2. Technological Parameter
2.1 Hot Rolling
Material: Aluminum and Aluminum Alloys.
Billet Size: 75x1000 x <1000(mm), Thickness x Widht x Length
Finished block size: 6 ~ 10(mm) x 1050mm x ~ 8000 (mm) Thickness x width x length
Rolling Mode: block rolling/single sheet rolling
Maximum gap between roller: 150-200mm, minimum gap=0
Rolling Speed: 0 45 m/min
Rolling Pressure: 8000 K.N
2.2 Cold Rolling Aluminum and Aluminum Alloys
Rolling Mode: block rolling/single sheet rolling
Billet Size: 6 10x1050xL(mm)
Finished product size: 1x1050xL(mm)
Maximum gap between roller: 50mm, minimum gap=0
Rolling Speed: 0 45m/min
Rolling Pressure: 8000 K.N
3. Down Press Device
3.1 In Hot Rolling:
Down Press Motor: Capacity=30KW DC,
No. of sets: 2 sets
Mechanism=Speed indicator, automatic with fully controlled by PLC digitally and displayed digitally.
Down press screw diameter:Φ250mm, down press speed: 1 mm/sec.
3.2 In Cold Rolling:
Down Press Motor: Capacity=30KW DC,
No. of sets: 2 sets
Mechanism= Speed indicator,
automatic with fully controlled by PLC digitally and displayed digitally
Down press screw diameter: Φ250mm, down press speed: 0.05mm/sec.
4. Main Transmission
Main motor: 790KW DC,
Working voltage: 380V(rated voltage: 440V)
Type: Z560-3A
RPM: 520-1200r/min
5. Frame Assembly
Two pieces closed archway frame, frame column section: 380mm X 450mm;
Frame material: #36 cast steel
Frame column section: Artificial shovel blows(polishing)
For more information, please contact us as soon as possible.
1. The main facilities of rolling mill and their functions
One cold rolling mill or one hot rolling mill is mainly equipped with down press device, frame assembly, roller device, transmission device, coiling machine and electrical control system.
2. Technological Parameter
2.1 Hot Rolling
Material: Aluminum and Aluminum Alloys.
Billet Size: 75x1000 x <1000(mm), Thickness x Widht x Length
Finished block size: 6 ~ 10(mm) x 1050mm x ~ 8000 (mm) Thickness x width x length
Rolling Mode: block rolling/single sheet rolling
Maximum gap between roller: 150-200mm, minimum gap=0
Rolling Speed: 0 45 m/min
Rolling Pressure: 8000 K.N
2.2 Cold Rolling Aluminum and Aluminum Alloys
Rolling Mode: block rolling/single sheet rolling
Billet Size: 6 10x1050xL(mm)
Finished product size: 1x1050xL(mm)
Maximum gap between roller: 50mm, minimum gap=0
Rolling Speed: 0 45m/min
Rolling Pressure: 8000 K.N
3. Down Press Device
3.1 In Hot Rolling:
Down Press Motor: Capacity=30KW DC,
No. of sets: 2 sets
Mechanism=Speed indicator, automatic with fully controlled by PLC digitally and displayed digitally.
Down press screw diameter:Φ250mm, down press speed: 1 mm/sec.
3.2 In Cold Rolling:
Down Press Motor: Capacity=30KW DC,
No. of sets: 2 sets
Mechanism= Speed indicator,
automatic with fully controlled by PLC digitally and displayed digitally
Down press screw diameter: Φ250mm, down press speed: 0.05mm/sec.
4. Main Transmission
Main motor: 790KW DC,
Working voltage: 380V(rated voltage: 440V)
Type: Z560-3A
RPM: 520-1200r/min
5. Frame Assembly
Two pieces closed archway frame, frame column section: 380mm X 450mm;
Frame material: #36 cast steel
Frame column section: Artificial shovel blows(polishing)
For more information, please contact us as soon as possible.
