Audited Supplier
UHF VHF 2g 3G 4G 5g WiFi GPS
20MHz-6g
Jammer System or Other Amplifier Signal Systems
DC24V or DC28
Heatsink with Fans
1 Year
2-6weeks
MEJOR
Carton Packing
200*100*25mm
Shenzhen
Product Description
20-6000MHz narrow band 25-250watts gsm dcs 3g lte uhf vhf RF power amplifier module
Specification
| Advantages: Small size and light weight with built-in control and protection circuits High efficiency up to 45% have sufficient power capacity to ensure high reliability Output power can from 10watts to 250watts Sweep signal source,White noise signal source, DDS or digital signal source are optional Support to add Sweep Generator or Wide-band Noise Generator or Digital Generator as jammer module Customized Service screen printing customized contents can be customized,such as logo, model etc | |
Specification
| Item | Parameters | Renark | ||||
| Frequency range | 20-88/134-174/300-350/400-500/925-960/1805-1880/2110-2175/2400-2500/5700-5900 or any 5-300MHz band in 20-6000MHz | |||||
| input Power | ≤10dBm or customized | |||||
| Output Power@CW | 25/50/100/125watts | |||||
| Gain | 45-55dB | |||||
| Gain Flatness(dB) | ≤1dB if frequency range<100MHz | |||||
| ≤1.5dB if frequency range<200MHz | ||||||
| ≤2dB if frequency range<300MHz | ||||||
| VSWR | <1.5 | |||||
| Gain Adjustment range | ≥31dB | |||||
| Efficiency | ≥35% | |||||
| RF connectors | SMA(F)/N female or customized | |||||
| Monitoring interface | DB9 | |||||
| working voltage | 28VDC | |||||
| Operating temperature | -35~+65 degree | |||||
| Storage temperature | -55 to +85 degree | |||||
| Protection | VSWR protection | If VSWR exceeds 3:1, an alarm is generated and PA will off if PA exceeds 5:1 | all threshold can be cusmotized | |||
| Temperature protection | If temperature exceeds 60 ºC, generates an alarm and reach 80ºC, turn off the amplifier,until the temperature returns to below 55 ºC, re-open PA | |||||
| provide Forward power voltage detection,Reverse power voltage detection,Temprature voltage detection and Enable | ||||||
| support to monitor output power, Reverse power, VSWR value or temperature value via RS-232 port | ||||||
Some PA test report:
100watts 3000-3500MHz | 100watts 950-1250MHz |
Company information
