Audited Supplier
VT
Aluminum Electrolytic Capacitor
General Purpose
Through Hole
0.1UF~6800UF
Fixed Capacitor
Electrolytic
Electrolytic
Standard Type of V-Chip, -55 ~ +105ºC.
Electrolytic
Aluminum Electrolytic Capacitor
HYECAP
Through Hole
V-Chip
China(Mainland)
8532220000
Product Description
2000h High-Quality Vt Aluminum Electrolytic Capacitor 470UF 25V, V-chip Capacitor
Feature
Temperature up to 105ºC with load life of 2000 hours.
Specifications
| Items | Performance Characteristics | |||||||||||
| Operating Temperature Range | -55~105ºC | |||||||||||
| Voltage Range | 4~100V | |||||||||||
| Capacitance Range | 0.1~6800μF | |||||||||||
| Capacitance Tolerance | ±20% at 120 Hz 20ºC | |||||||||||
| Leakage Current | For Φ4~Φ10 after 2 minutes application of rated voltage leakage current is not more than 0.01CV or 3(μA) whichever is greater. For Φ12.5~Φ16 after 1 minutes application of rated voltage leakage current is not more than 0.03CV or 4(μA) whichever is greater. | |||||||||||
| Tan δ | Measurement frequency 120Hz Temperature 20ºC | |||||||||||
| Rated voltage(V.DC) | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | |||
| Tan δ(Max) | Φ4~Φ10 | 0.35 | 0.26 | 0.20 | 0.16 | 0.14 | 0.12 | 0.12 | 0.12 | 0.12 | ||
| Φ12.5~Φ16 | 0.42 | 0.38 | 0.34 | 0.30 | 0.26 | 0.22 | 0.18 | 0.14 | 0.12 | |||
| Stability at Low Temperature | Measurement frequency 120Hz | |||||||||||
| Rated voltage(V.DC) | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | |||
Impedance ratio ZT Z20(Max) | Φ4~Φ10 | Z(-25ºC)Z(20ºC) | 7 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | |
| Z(-55ºC)Z(20ºC) | 15 | 8 | 6 | 4 | 4 | 3 | 3 | 3 | 4 | |||
| Φ12.5~Φ16 | Z(-25ºC)Z(20ºC) | 7 | 5 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | ||
| Z(-55ºC)Z(20ºC) | 17 | 12 | 10 | 8 | 5 | 4 | 3 | 3 | 3 | |||
| Load Life | After 2000 hours application of rated voltage at 105ºC capacitors meet the characteristics requirements listed at right. | Capacitance Change | Within±20 of the initial value for capacitors of 10V or more and within ±30 of the initial valure for capacitors of 4V&6.3V | |||||||||
| Tan δ | 200 or less of the initial specified value | |||||||||||
| Leakage Current | Initial specified value or less | |||||||||||
| Shelf Life | After leaving capacitors under no load at 105ºC for 1000 hours they meet the specified value for load life characteristics listed above. | |||||||||||
| Resistance to Soldering Heat | After reflow soldering and restored at room temperature they meet the characteristics requirements listed at right | Capacitance Change | Within±20 of the initial value for capacitors of 10V or more and within ±30 of the initial valure for capacitors of 4V&6.3V | |||||||||
| Tan δ | 200 or less of the initial specified value | |||||||||||
| Leakage Current | Initial specified value or less | |||||||||||
| Applicable Standards | JIS C-5141 and JIS C-5102 | |||||||||||
Dimensions(mm) & Marking
