Audited Supplier
HL
Coloured
High Tenacity, Eco-Friendly, Self Adhesive
Coated
Polyester / Nylon
25m/Roll, 50m/Roll
AleTape
Carton
10-200MM
China
5306
Product Description
Hook & Loop Fastener Tape can be appreciated to shoes, medical, sporting bag, carpets, toys and camping.
Product Description
1. Regular width: 20, 25, 50, 100mm till 300mm.
2. Special width is available as per order requirement.
3. Available in 528 colors.
4. OEM and special designs are welcomed.
5. Both 'sew-on' and 'self-adhesive'.
6. We can supply 50m rolls no welding joint.
7. Standard hook, standard loop, injection hook, non brush loop, velour loop are available.
REMARKS
Grade A (100%nylon)
Grade B (60%nylon+40%polyester)
Grade B (50%nylon+50%polyester)
Grade C (40%nylon+60%polyester)
Grade C (30%nylon+70%polyester)
APPLICATION DIRECTIONS:
Self adhesive hook and loop fastening tape can be used on most flat, dry surfaces.
Do not apply on PVC plastic, wallpaper, wall board, palster, stucco, veneers, unfinished wood or any loose surface.
The way to use the self adhesive hook and loop tape.
1. Be sure surface is clean, dry and grease free.
2. Cut the tape to the desired length.
3. Place the tape with the loop side on one surface and the hook side on the other.
4. Press firmly in place.
5. Wait at least 5 minutes for the adhesive to take hold.(The bond reaches maximum strength after 24 hours)
Our liability is limited to refund or replacement of tape to the original purchaser with proof of purchase.
Product Description
1. Regular width: 20, 25, 50, 100mm till 300mm.
2. Special width is available as per order requirement.
3. Available in 528 colors.
4. OEM and special designs are welcomed.
5. Both 'sew-on' and 'self-adhesive'.
6. We can supply 50m rolls no welding joint.
7. Standard hook, standard loop, injection hook, non brush loop, velour loop are available.
REMARKS
Grade A (100%nylon)
Grade B (60%nylon+40%polyester)
Grade B (50%nylon+50%polyester)
Grade C (40%nylon+60%polyester)
Grade C (30%nylon+70%polyester)
APPLICATION DIRECTIONS:
Self adhesive hook and loop fastening tape can be used on most flat, dry surfaces.
Do not apply on PVC plastic, wallpaper, wall board, palster, stucco, veneers, unfinished wood or any loose surface.
The way to use the self adhesive hook and loop tape.
1. Be sure surface is clean, dry and grease free.
2. Cut the tape to the desired length.
3. Place the tape with the loop side on one surface and the hook side on the other.
4. Press firmly in place.
5. Wait at least 5 minutes for the adhesive to take hold.(The bond reaches maximum strength after 24 hours)
Our liability is limited to refund or replacement of tape to the original purchaser with proof of purchase.
