Audited Supplier
HCLW-24
Cold Shrink
Silicone Rubber
Insulation, Protection
Insulation
Terminal
Cold Pressing
Rectangular
ISO, IEC, GB
Hifuture
25-630 Sq.M.
Single-Core, Three-Core
Cu, Al, Cual
Excellent Insulation, Anti-Tracking, etc
HiFuture
1 Set/ Carton
12kV, 24kV, 36kV
Shenzhen, China
8538900000
Product Description
24kV outdoor cold shrink termination
8.7/15(17.5)kV
12/20(24)kV
26/35(40.5)kV
Cold Shrink Cable Accessories:
1. Hifuture cold shrinkable cable accessories adopt world renowned brand liquid/solid silicone rubber material. The products are with excellent insulation, anti-tracking, rebound resistance, heat/cold resistance, ozone resistance, anti-aging, and good dielectric properties, and can be used under various harsh conditions.
2. Geometric stress control method.
3. Standards compliance: IEC60502, GB/T12706.4, EN50180& EN50181(C type bushing)
4. Cold installation, easy and safe without using fire, just by pulling the spiral.
Technical Data:
8.7/15(17.5)kV
| Voltage class | Indoor Termination | Outdoor Termination | ||
| Cold Shrink Type | Cross section (mm²) | Cold Shrink Type | Cross section (mm²) | |
| 8.7/15 (17.5)kV | HCLN-10-S-1 | 25-50 | HCLW-10-S-1 | 25-50 |
| HCLN-10-S-2 | 70-120 | HCLW-10-S-2 | 70-120 | |
| HCLN-10-S-3 | 150-240 | HCLW-10-S-3 | 150-240 | |
| HCLN-10-S-4 | 300-400 | HCLW-10-S-4 | 300-400 | |
| HCLN-10-S-5 | 500-630 | HCLW-10-S-5 | 500-630 | |
12/20(24)kV
| Indoor Termination | Outdoor Termination | Conductor Cross Section (mm²) | |||
| Cold Shrink Type | Pre-molded Type | Cold Shrink Type | Pre-molded Type | 8.7/15(17.5)kV | 12/20(24)kV |
| HCLN-20-S-1 | HCYN-20-1 | HCLW-20-1 | HCYW-20-1 | 25-50 | 25 |
| HCLN-20-S-2 | HCYN-20-2 | HCLW-20-2 | HCYW-20-2 | 70-95 | 35-70 |
| HCLN-20-S-3 | HCYN-20-3 | HCLW-20-3 | HCYW-20-3 | 120-150 | 95-120 |
| HCLN-20-S-4 | HCYN-20-4 | HCLW-20-4 | HCYW-20-4 | 185-240 | 150-185 |
| HCLN-20-S-5 | HCYN-20-5 | HCLW-20-5 | HCYW-20-5 | 300-400 | 240-400 |
| HCLN-20-S-6 | HCYN-20-6 | HCLW-20-6 | HCYW-20-6 | 500-630 | 500-630 |
26/35(40.5)kV
| Indoor Termination | Outdoor Termination | Conductor Cross Section (mm²) | |||
| Cold Shrink Type | Pre-molded Type | Cold Shrink Type | Pre-molded Type | 18/30(36)kV | 26/35(40.5)kV |
| HCLN-35-1 | HCYN-35-1 | HCLW-35-1 | HCYW-35-1 | 50-120 | 50-95 |
| HCLN-35-2 | HCYN-35-2 | HCLW-35-2 | HCYW-35-2 | 150-240 | 120-185 |
| HCLN-35-3 | HCYN-35-3 | HCLW-35-3 | HCYW-35-3 | 300-630 | 240-400 |
| HCLN-35-4 | HCYN-35-4 | HCLW-35-4 | HCYW-35-4 | 500-630 | |
Cold Shrink Cable Accessories:
1. Hifuture cold shrinkable cable accessories adopt world renowned brand liquid/solid silicone rubber material. The products are with excellent insulation, anti-tracking, rebound resistance, heat/cold resistance, ozone resistance, anti-aging, and good dielectric properties, and can be used under various harsh conditions.
2. Geometric stress control method.
3. Standards compliance: IEC60502, GB/T12706.4, EN50180& EN50181(C type bushing)
4. Cold installation, easy and safe without using fire, just by pulling the spiral.
Technical Data:
| Rated Voltage | 8.7/15(17.5)kV | 12/20(24)kV | 18/30(36)kV | 26/35(40.5)kV |
| Running Temperature | 17.5kV | 24kV | 36kV | 40.5kV |
| AC Withstand Voltage and DC Withstand Voltage | 39kV, 5min or 35kV, 15min, no flashover, no breakdown | 54kV,5min, or 48kV, 15min, no flashover, no breakdown | 81kV, 5min, or 72kV, 15min, no flashover, no breakdown | 117kV, 5min or 104kV, 15 min no flashover, no breakdown |
| Partial Discharge | 15kV, PD≤5pC | 20kV, PD≤5pC | 30kV, PD≤5pC | 45kV, PD≤5pC |
| Impulse Voltage Test | 95kV, ±10 times | 125kV, ±10 times | 170kV, ±10 times | 200kV, ±10 times |
| Short Circuit Thermal Stability (Conductor) | 24kA, 2s twice, no visible damage | 25kA, 2s twice, no visible damage | 23kA, 2s twice, no visible damage | 25kA, 2s twice, no visible damage |
| Short Circuit Dynamic Stability | 83kA, not less than 10ms, no visible damage | 63kA, not less than 10ms, no visible damage | 83kA, not less than 10ms, no visible damage | 88kA, not less than 10ms, no visible damage |
| Constant Voltage Load Cycle | apply voltage 1.25U0 to conductor and heat to(90-95)ºC heat for 5h and cool for 3h, total 3 times | |||
| Salt Spray Test | 1.25U0 1000h, no flashover, no breakdown, trip not more than 3 times, no obvious damage | |||
| Humidity Test | 1.25U0 300h, no flashover, no breakdown, trip not more than 3 times, no obvious damage | |||
| Long-time Running Temperature | -40ºC to 95ºC | |||
| Short Circuit Temperature | 250ºC, lasting time less than 5s | |||
| Cable Accessories Conductor Material | copper, aluminum, copper&aluminum | |||
