SMC Single Phase Electric Power Meter Box

Waterproof Ordinary Type Electric SMC  Box 

Workshop overview:



1. Applicable for CT secondary protection of low voltage end of transformer.            

2. The hole position is adjustable on work spot.

3. Sealed is avilable.


SMC Cabinet Introduction:

1.Adopting SMC material, moulding under the high temperature and pressure, the sheet has high intension, high modulus and excellent anti-collision.

2. SMA Cabinet is lighter 1/3 than metal is of the same size , thus much metal source could be saved.
3.Excellent electric insulativity,ensuring applicating secure use for indoor and outdoor.

4. Anti-corrosion and aging, no decay and corrosion, available for rainy and moist costal area and chemical industry, power station and so on, over 20 years working lifetime.

5.Special exterior design and the surface disposal results in the cabinet nice looking with no light pollution and anti poster.

6.Combined mounting cabinet with convenient installation, the flexible combination can suit for many space requirement. Protection class is from IP33 to IP56.

7.Special structure design and venting disposition can reduce the phenomenon of dew and frost inside box.


The material traits

1.Excellent insulatibity
SMC has high insulation resistance and AC dielectric intension, nice dielectric ability under high AC, no reflection, no block of microwave radiation.

2.Chemical corrosion resisting and environment aging
Resisting corrosion of low concentration acid,alkali,salt,resisting many kind of oils and organic solvent, sea water and so on, and resisting ultraviolet radiation and environment aging.

3.Out temperature resistance
Heat deflection temperature over 200ºC,and low temperature resistant. The material can keep excellent mechanical features in a wide range range of temperature(40ºC-160ºC).

4.Excellent anti-collision
Three dimensional net structure inside the material and the increasing fuction of the longer fiber,resulting in excellent collision resistance and insentive to the gap, and excellent machining ability (drilling and cutting).

5.Flam retardaw and smoke density
Flam retardaw:FV0.Smokedensity class:15.The gas toxicity class:ZA1.

6.Lightweight and Hight-strength
Specific gravity between 1.75g/cm³and 1.95g/m³,high intension and modulus.