Audited Supplier
356SR
Life Time
12 Month
Universal Type
Hydraulic Transmission
Crawler
Front Discharge
<74kw
ISO9001: 2000
New
Yellow
4 Cylinder
fusen
Nude
2960*1650*2285mm
China
84291190
Product Description
35HP Mini Crawler Bulldozer with Six Action Blade
1. Main Features :
1. Main Features :
Our 35HP Mini Crawler Bulldozer is used in bulldozing, land leveling, snow grading, excavating, ditch clearance, etc, can be euipped with with 6 action blade, 4 in 1 loader, backhoe, ripper, mower, and other tractor implements driven by PTO.
2. Dimensions of Bulldozer
| Model Items | FDT356S-SA |
| Overall length(with blade or loader) (mm) | 2960 |
| Overall length (no blade or loader) (mm) | 1940 |
| Overall width(with straight blade or loader) (mm) | 1650 |
| Overall width (no blade or loader) (mm) | 1410 |
| Overall height to top of ROPS (mm) | 2285 |
| Ground contact length (mm) | 1100 |
| Track gauge (mm) | 1150 |
| Shoe width (mm) | 260 |
| Ground clearance (mm) | 240 |
| Operating weight (kg) | 2830 |
| Max. drawbar pull (kgf) | 2350 |
3. Six-action blade
| Height of blade (mm) | 675 |
| Lift height of blade (mm) | 500 |
| Max. digging depth of blade (mm) | 80 |
| Blade capacity | 0.67 m3 |
4. Performance
| Model Specifications | FDT356S-SA | ||
| Engine | Type | In-line,water-cooling,swirl chamber | |
| No.of Cylinder | 4 | ||
| Cylinder Bore | 85mm | ||
| Piston Stroke | 95mm | ||
| Displacement | 2.16L | ||
| Aspiration | Natural | ||
| Max. power | 25.7kw@2350rpm | ||
| Max. torque | 120Nm@1650rpm | ||
| Fuel | Diesel | ||
| Fuel consumption | ≤264g/kWh | ||
| Lubrication means | Full pressure by rotary pump | ||
| transmission | Clutch | Single dry disk diaphragm-spring clutch 10", pedal control | |
| Gearbox | 2-shaft, sliding gear shift, 8fwd+2rev | ||
| Main drive | Spiral bevel gear | ||
| Final drive | Externally meshed spur gear | ||
| Brake and steering (interconnected) | steering clutch | Dry ceramic-metallic multi disk clutch | |
| brakes | Brand brakes controlled by pedals | ||
| Undercarriage system | Undercarriage frame | Semi-rigid | |
| Track rollers(each side) | 5+1 | ||
| Tension device | Helical spring, adjusted by screw | ||
| Number of shoes | 40 (1pitch=109mm) | ||
| Hydraulic blade and 3-point hitch system | Gear Pump | CBT-F314 | |
| Rated capacity | 29.4 lpm(7.7gpm) (depend on the rotation speed of engine) | ||
| Rated pressure of relief valve | 16MPa(2230psi) | ||
| Control valve | 4-spool | ||
| Blade control | Lift: raise, hold, lower, float | ||
| Angle: right, hold, left | |||
| Tilt: right, hold, left | |||
| Blade lift cylinder bore X stroke / number | Double action 50mm X 285mm / 2 | ||
| Blade angle cylinder bore X stroke / number | Double action 63mm X 280mm / 2 | ||
| Blade tilt cylinder bore X stroke/ number | Double action 63mm X 50mm / 1 | ||
| Hitch control by 1 level | Raise, hold, lower(float) | ||
| Elevating cylinder boreXstroke /number | Single action 80mm X100mm / 1 | ||
| Lift capacity @hitch point | 7350N(1650lbs) | ||
| Lifting height at hitch point: | 720mm | ||
| Type of hitch | Rear 3-point, category I | ||
| Power take-off | Type | Mechanical, dependent | |
| Two rotary speeds | 540rpm @engine 1812rpm | ||
| 1000rpm @engine 1772 rpm | |||
| Shaft diameter | 35mm(1 3/8"), 6 splines | ||
