Audited Supplier
NKE90 Series
Engineers Follow
12 Months
Automatic
Electric Energy
61-70t
Zero Emission
6×4
Electric
≤5
251-350hp
GCC, ISO, DOT
Radial
Front Lifting Style
New
34 Ton
56 Ton
90 Ton
Single
288 Kw
1 ~1.5 Hour
14.00r25
36 Cubic Meter
KNOW-HOW
Nude Packing
Mining Application
China
8704230090
Product Description
In near future, under the trend of low-carbon and environmental protection, Zero Carbon Dioxide mining machinery will be the mainstream trend, and it will be an irreversible trend in the future for new energy mining machinery to replace traditional fuel mining machinery.
Budget Money Saving -- Saving 50%~70% anually for your mining budget . | Time & Human Resource Saving -- No need to do parts replacing for your truck often. |
| -- For Example: If your diesel trucks fleet is consuming 200,000 USD / Year , then , Electric trucks fleet will be only consuming 64300 USD / Year . | -- You will not have to worry if the trucks are on suspension once there are short of parts . Diesel Trucks with engines are more complicated than Electric Trucks . |
| Description | Unit | NKE90Series |
| Tare weight | kg | 34000 |
| Payload | kg | 56000 |
| G.V.W | kg | 90000 |
| Wheelbase | mm | 4050+1550 |
| Wheel track(F/R) | mm | 2790/2605 |
| Dimension | mm | 9750*3600*4100 |
| Lifting Angle | ° | 48 |
| Standard/Pile Capacity | m3 | 34/39 |
| Turning Radius | mm | <12000 |
| Tire Size | m | 14.00R25 |
| Ground Clearance | mm | 380 |
| Gear Ratio | 14.298 | |
| Axles | 3 | |
| Driving Type | 6*4 | |
| Axle Loading Front/Middle/Rear | t | 20+35+35 |
| Rated Power / Max Power | Kw | 450/600 |
| Gears | 7 | |
| Climbing Angle | % | ≥35 |
| Max.Speed | Km/h | ≥42 |
| Front Suspension | Hydraulic Spring + Cylinder | |
| Rear Suspension | Balance shaft + Hydraulic Spring + Cylinder | |
| Battery Capacity | Kwh | 288/350 / 422 / 564 / Optional |
| High reliability Integral welded equalizing suspension system and container frame increase the service life of the complete vehicle by 15%. |
| High safety Full hydraulic steering system makes steering lighter and safer; Free of a subframe container structure, lowering the center of gravity by 100MM. |
| High comfort The front hydro-pneumatic suspension structure replaces the traditional leaf spring structure, which significantly improves the driving comfort and extends the service life of key components and parts. |
| High load bearing capacity With the newly upgraded heavy-load axle, the vehicle has a large bearing capacity and high comprehensive transportation efficiency. |
| Founded in Shuozhou, Shanxi Province in 1998, KNOW-HOW Group is a leading manufacturer and service provider of mining equipment in China. It consists of well-known enterprises such as KNOW-HOW Technology, KNOW-HOW Electromechanical and KNOW-HOW Construction. There are three R&D centers respectively built in Tianjin, Shenyang and Changzhou. More than 85% of its employees have a college degree or above, and more than 65% get professional qualification certificates. Following the cooperation philosophy of "commitment, tolerance, quality and cooperation", KNOW-HOW Group provides services for more than 40 well-known domestic and foreign enterprises including China Coal, China Shenhua Company Limited, Shaanxi Coal and Chemical Industry Group Co., Ltd., etc. Therefore, a pattern with four core businesses "industry investment, equipment maintenance, engineering and new energy equipment development of mining and energy supply services" is formed. The Group practices the strategy of "customer intimacy". Under the guidance of its spirit of "service, progressive, innovation, and truth-seeking", KNOW-HOW Group further gathers strength and makes full use of its advantages. It has built intensive, intelligent and efficient mining equipment by deep integration of mining equipment development, energy supply services, and maintenance and operations of equipment. It promotes the development of clean energy in mining areas and provides one-stop services for mining enterprises to make contributions to ecological civilization and green mines. |
| |
| |
| |
* We supply customized products that meets the different mining area working situation .
* We can help you calculate how much you will save for your mining business with our trucks and equipment .
* We can even assist with your technical engineers to issue a full solution for your mining , including set up the whole electric charging system .
A: For terms of payment, L/C, T/T could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the lead time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occurs first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
6. How long will it take for the electric charging ?
A: 2 hours
7. How long will it take for replacing the battery ?
A: 5~10 mins
For more detailed product information or for sound proposal for your mining ,please send email to me.
