Audited Supplier
2W250-25EX
Water, Air, Gas, Oil, etc
Solenoid
Thread
Brass
0 to 1 MPa
Direct Action Diaphragm Structure
AC, DC
Flow Control
GB
Industrial Usage, Water Industrial Usage
1''
25mm
2 Way Normally Closed
NBR, EPDM, FKM
NBR: -5~80, EPDM: -5~120, FKM: -10~150
12VDC, 24VDC, 24VAC, 110VAC, 220VAC
BRANDO
Box, Carton, Pallet
1.2kg
Ningbo, China
8481804090
Product Description
| 2W Series | 2W025-06S | 2W025-08S | 2W040-10S | 2W160-10S | 2W160-15S | 2W200-20S | 2W250-25S | 2W350-35S | 2W400-40S | 2W500-50S |
| 2S Series | 2S025-06S | 2S025-08S | 2S040-10S | 2S160-10S | 2S160-15S | 2S200-20S | 2S250-25S | 2S350-35S | 2S400-40S | 2S500-50S |
| Orifice Size | 2.5mm | 2.5mm | 4mm | 16mm | 16mm | 20mm | 25mm | 35mm | 40mm | 50mm |
| CV Value | 0.23 | 0.6 | 4.8 | 12 | 24 | 29 | 48 | |||
| Port Size | 1/8'' | 1/4'' | 3/8'' | 3/8'' | 1/2'' | 3/4'' | 1'' | 1 1/4'' | 1 1/2'' | 2'' |
| Body Material | Brass: 2W Series Stainless Steel: 2S Series | |||||||||
| Seal Material | NBR (Standard), EPDM, FKM(Optional) | |||||||||
| Function | 2 Way Normally Closed (Standard) 2 Way Normally Open (Optional) | |||||||||
| Operation | Direct Acting | Direct Lift Diaphragm | ||||||||
| Media | Water, Air, Oil, Gas, etc | |||||||||
| Fluid Viscosity | 20 CST below | |||||||||
| Pressure Range | 0 to 1 MPa | |||||||||
| Temperature Range | NBR: -5 to +80 ºC EPDM: -5 to +120 ºC FKM: -10 to +150 ºC | |||||||||
| Voltage | 12VDC, 24VDC, 24VAC, 110VAC, 220VAC | |||||||||
2W250-25EX
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert media in an application. They are used in a wide variety of applications.
Question 2: How can you tell if your solenoid is bad?
Answer 2: If the solenoid valve fails to open or close, is partially open, makes a humming noise or has a burned-out coil, you need to troubleshoot the valve solenoids.
Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know your media. Depending upon the media and flow requirement, choose the material, orifice size, temperature, pressure, voltage, response time and certification required for your application.
