
Overview

Key Features
1. Strict Control Pilot
2. Multiple Charging Mode
Totally three charging modes of automatic charging, reservation charging and ration charging are selected according to actual situation. Start methods of plug and charge, by IC card, by APP and by pressing start button could also be set freely aims to meet different requests of various customers.
3. Robust Protection
The charging pile has been equipped with robust protection functions of overload, surge, overvoltage, undervoltage, short circuit, earthing, overheat, lightening, emergency stop, etc to avoid damages by accident caused by abnormal weather or grid.
4. Appearance with Perfect Sealing
Appearance design adopts zinc-plated board + multi-layer spraying process to achieve excellent sealing, which can resist the rainstorm effectively. The multi-layer spraying technology could prevent rust from causing damage to the product. Anti-ultraviolet treatment adopted in the coating process aims to restrain the cabinet from aging, which has ensured longer life cycle of the product.
Electric Features
Item | Technical Requirements | Note | |
Input Feature | AC input voltage | 220 VAC | System Input Voltage |
AC Input Frequency Range | 45-65Hz | ||
Power Factor | ≥0.99 | 50% or higher load | |
AC Input Mode | Single-phase Three-ware system | L+N+PE | |
Output Feature | Output Voltage Regulating Range | 230VAC | |
Output Charging Interface | Meet GB/T Standard/American Standard | ||
Stable Voltage Precision | ≤±0.5% | In Full Output Range | |
Stable Current Precision | ≤0.5% | ||
Voltage Error | ≤±0.5% | ||
Current Error | ≤±1% Output DC Current≥30A ≤±0.3A Output DC Current<30A | ||
Average Flow Unbalance Degree | ≤±5% | ||
Average Efficiency | ≥95% | 50% or higher load | |
Input Current Harmonic Wave | ≤5% | ||
Other Feature | Noise | ≤65dB | |
RCD Protection | YES | ||
Power Frequency Withstand Voltage | 2500V AC-3500V DC | ||
Insulation Resistance | ≥20MΩ | Test Voltage 1000V DC | |
IP Class | IP54 | ||
Connector Cable Length | Standard Length is 5M | ||
Environmental Protection | Meet 2011/65/EU |
How to Use
A. How to start charging
1. Make sure the charger is well connected with the power.
2. Use your Mode 3 EV charging cable to connect the charger with the EV.
B. How to stop charging
1. The charger will stop automatically when the charging is finished.
2. Disconnect the Mode 3 EV cable from the charger and the EV on its both ends.
Production Line
Hiconics Intelligent has built national advanced automatic assembly production line with rhythm set automatically. Operation documents are put on display screen. Debugging and aging process are operated with automation equipment. Data self-collection, self-diagnosis and self-uploading could be achieved also. One charging pile could be finished within 35 minutes and daily production capacity reaches 13 sets for each production line.

Application
Hiconics charging piles have been widely applied in more than 200 cities in China. The specially developed European Standard Charging Pile has passed strict test procedure of TUV SUD and been awarded with CE and Dakks certificates. Hiconics products have been exported to more than 10 countries and regions such as England, France, Bulgaria, Australia and Singapore, etc.

Good to Know
-This EV charger is special for home use. It doesn't have the billing function.
-This charger have auxiliary support and charging connector, which could be used directly with the EV.
-If you have no experience in installing electrical equipment, please contact the local electrician for assistance.
-This charger has precise internal structure. Please do not take it apart without any professional technical support. Any questions, please contact our Customer Service Manager at the first time.
-Do not install it outside without any shelter.
-This charger is only for EV charging. Please don't use it in any other occasions.
About Hiconics Group

A: Generally, we pack our goods in neutral brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your term of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your term of delivery?
A: FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 7 to 25 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.