Audited Supplier
MDR-100-12
Single
2 Years
51 - 100W
110-220V
Series Switching Power Supply
Self-excited Switching Power Supply
Frequency Modulation Type
Terminal Power Distribution Equipment
One-way Transmission
PWM
CE, RoHS, ISO, CCC
Mwish
50PCS/CTN
0.6kg
MWISH
Export Package
100*90*55mm
China
8504401990
Product Description
| *International wide range AC input *Protection type: short circuit, over load, over voltage *Natural cold wind *Mounted on TS-35/7.5 or TS-35/15 rails *accord with NEC class2 accord with LPS *Built in active DC OK signal *LED Power indication *No load power loss:<0.75W *100% full load burn-in test | |||
| Specification ModelNo. | MDR-100-12 | MDR-100-24 | MDR-100-48 |
| DC output voltage | 12V | 24V | 48V |
| Output voltage range (Note:2) | ±2% | ±1% | ±1% |
| Rated output current | 7.5A | 4A | 2A |
| output current range | 0~7.5A | 0~4A | 0~2A |
| Wave and noise (Note:3) | 120mVp-p | 150mVp-p | 200mVp-p |
| Inlet stability (Note:4) | ±0.1% | ±0.1% | ±0.1% |
| Load stability (Note:5) | ±0.1% | ±0.1% | ±0.1% |
| DC output power | 100W | 100W | 100W |
| Efficiency | 85% | 86% | 88% |
| Adjustable range for DC voltage | 12~15V | 24~30V | 48~56V |
| AC input voltage range | 85~264VAC/120~370VDC | ||
| output current | 1.3A/115 0.8A /230V | ||
| AC rush current | 30A/115V 60A/230V | ||
| Leakage current | <1mA/240VAC | ||
| Overload protection | 105%-150% hiccup mode,auto-recovery | ||
| Over-Voltage protection | 15.6~18V / 31.2~36V /57.6~64.8V | ||
| DC OK signal | 30V1AImpedance load | ||
| Temperaut re cofficient | ±0.03%/ºC (0~50ºC) | ||
| Setup,rise,hold up time | 200s,100ms,20ms | ||
| Vibration | 10~500Hz, 2G 10min,1 cycle Pariod for 60min, Each axes | ||
| Withstand voltage | I/P-O/P:3Kv I/P-FG:1.5KV O/P-FG:0.5KV 1minute | ||
| Insulation resistance | I/P-O/P IP/FG OP-FG:500VDC/100MΩ | ||
| Working temperature and humidity | -10ºC~+60ºC,20%~90%RH | ||
| Storage temperature and humidity | -40ºC~+85ºC,10%~95%RH | ||
| Overall dimension | 55*90*100 mm | ||
| Safety Standards | Meet UL 508,UL60950-1 requirement | ||
| Electromagnetic interference | EN55011,EN55022(CISP22),EN61204-3 ClassB | ||
| Harmonic current | EN61000-3-2,-3 | ||
| Electromagnetic tolerance | EN6100-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3 ClassA | ||
| Weight | 0.42Kgs | ||
| Note: 1.The testina condition for The Paramenter is:230VAC input,rated load, 25ºC 70% RH Temperature 2.Error incude the seting error, line stability and load stability 3.Wave test:adopt in "A12"double wire for 20MHz,and 0.1 UF capacitor short-circuit for interrupt bug 4.Inlet voItage stability test:When is over load,the lowest voItage of inlet is up to the hiqhest voltaqe 5.Load stability test:the load is from 0% to 100% 6.C3,4 must be knocked down | |||
