Audited Supplier
ISOEM U-P-O-T
Signal Converter
0.1G
Ce, RoHS, ISO9001
Customized
0-5V,0-10V,0-75mv,0-2.5V,0-1mA,0-10mA...Customized
24V,12V,5V,15V Customized
4-20mA,0-20mA,0-5V,0-10V,1-5V Customized
PCB Packaging Way, DIN35 Rail-Mounted Packaging
2 Years
3-4 Working Days.
-20 ~ +70 ºC
- 45ºC ~ + 85ºC
2KΩ
Signal Converter
Analog Signal
Voltage Converter
SunYuan SZ
Tube+Box
10g for PCB, 75g for DIN35 Packaging
Shenzhen of China
8543709200
Product Description
Zero Gain Adjustable DC Voltage Current Signal Amplifier IC Electronic Component
Generalization
SUNYUAN ISO EM-T Series Analog Magneto-electric Isolated Amplifier/Transmitter is a kind of modules with hybrid integrated circuit inside which generates the signals with according matchable precision and linearity after the isolation, amplification, distribution, conversion process to the analog signals between sensors and PLC, instruments. In the IC, there are one multi-isolation DC/DC transforming power and a set of electric-coupling analog signal isolated transmitter.ISO EM-T Series Magneto-electric Transmitter is mainly applied in the field where there is no special requirements on EMC (electro-magnetic interference). And by employing internal isolation technique, proper I/O side cree-page distance,the isolated voltage of signal transmitter is up to 3000VDC.By adopting internal electric-magneto isolation technique, ISO EM-T Series Analog Magneto-electric Isolation Amplifier/ Transmitter has better performance in linearity and temperature drift than the transmitter with photo-electric isolation. The Zero, Gain adjustment are available through external multi-turn potentiometer to make it easy to do calibration and adjustment based on the operating states of the equipments in the industrial sites. The transmitter is widely applied in electric monitoring control, PLC, DCS, FCS, frequency converter, meters and instruments, medical equipments,industrial automatic equipments and other equipments or fields where electric measuring, isolated acquisition and controlare required.
Other products:
Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download:
1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA
2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series
3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E
4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F
5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA
Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download:
1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC
2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter
3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC
4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC
6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter
7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter
8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter
9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter
10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter
11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter
12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring
13,ISO F-P-O Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC
14,ISO U(A)-P-F Series: Analog Signal to Frequency Pulse Signal (V/F) Isolated Transmitter IC
15,ISO EM RMS-P-O Series: Analog True RMS (RMS) Signal Isolation Transmitter Isolation Amplifier
16.Large current output type high precision signal transmitter
| Features: | Applications: |
| 1. Precision grade: 0.1, 0.2, 0.5, nonlinearity grade (in full measuring range) <0.2%. 2. Zero, Gain, Full scale calibration are available through external multi-turn potentiometer. 3. Isolation power among auxiliary power, analog input, output: 3000VDC 4. Auxiliary power: 5V,12V,15V,24VDC, etc 5.Isolation, amplification and conversion among 0-75mV/ 0-5V/ 0-10V/ 0-1mA/ 0-20mA/ 4-20mA analog signal. 6. Industrial temperature range: -20 ~ +70 ºC 7. Electro-magnetic anti-interference circuits /shielding measures are required in the field with special EMC. 8. Low cost, compact SIP 12Pin, UL94V-0 standard flame retardant package. | 1. DC current/voltage signal isolation, conversion and amplification. 2. Long-distance isolated transmission of industrial site signals. 3. Analog signal GND wire anti-interference and data isolated acquisition. 4. Meters, instruments and sensors signal acquisition and transmission. 5. Isolated data acquisition of analog signals from PLC, DCS. 6. VFD/transducer signal long-distance transmission without distortion. 7. Power monitoring control, medical equipments isolated safety bar. 8. 4-20mA sensor analog signal 1x2, 2x2, 1x4 isolated amplification and transmission. |
SUNYUAN ISO EM-T Series Analog Magneto-electric Isolated Amplifier/Transmitter is a kind of modules with hybrid integrated circuit inside which generates the signals with according matchable precision and linearity after the isolation, amplification, distribution, conversion process to the analog signals between sensors and PLC, instruments. In the IC, there are one multi-isolation DC/DC transforming power and a set of electric-coupling analog signal isolated transmitter.ISO EM-T Series Magneto-electric Transmitter is mainly applied in the field where there is no special requirements on EMC (electro-magnetic interference). And by employing internal isolation technique, proper I/O side cree-page distance,the isolated voltage of signal transmitter is up to 3000VDC.By adopting internal electric-magneto isolation technique, ISO EM-T Series Analog Magneto-electric Isolation Amplifier/ Transmitter has better performance in linearity and temperature drift than the transmitter with photo-electric isolation. The Zero, Gain adjustment are available through external multi-turn potentiometer to make it easy to do calibration and adjustment based on the operating states of the equipments in the industrial sites. The transmitter is widely applied in electric monitoring control, PLC, DCS, FCS, frequency converter, meters and instruments, medical equipments,industrial automatic equipments and other equipments or fields where electric measuring, isolated acquisition and controlare required.
Other products:
Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download:
1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA
2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series
3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E
4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F
5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA
Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download:
1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC
2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter
3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC
4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC
6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter
7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter
8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter
9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter
10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter
11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter
12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring
13,ISO F-P-O Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC
14,ISO U(A)-P-F Series: Analog Signal to Frequency Pulse Signal (V/F) Isolated Transmitter IC
15,ISO EM RMS-P-O Series: Analog True RMS (RMS) Signal Isolation Transmitter Isolation Amplifier
16.Large current output type high precision signal transmitter
