3PE Anticorrosive Steel Pipe, Buried 3PE Anticorrosive Spiral Steel Pipe Drainage for Urban Water Conveyance Sewage Steel Pipe Plant

2 anti-corrosion steel pipe production lines, equipped with automatic pipe transportation device and screw conveyor roller table device to improve the efficiency of pipe transportation; Shot blasting and rust removal is equipped with Germany Rexroth hydraulic motor, equipped with Aberdeen electrostatic spraying equipment, Zhejiang Jinhu polyethylene extruder and other high-standard production equipment, which can carry out internal and external anti-corrosion of steel pipes with a diameter of 630-3220, with an annual production capacity of 4 million square meters; The product implements the national standard 23257 and the urban construction standard 120.
1. TPEP anti-corrosion is the most advanced anti-corrosion technology for steel pipes, with a service life of more than 50 years. It has been used for decades at home and abroad.
2. Strong ability to adapt to terrain. The steel pipe is highly flexible.
3. Low requirements for foundation, no need for sand cushion, and can be directly backfilled with original soil after welding, reducing construction costs.
4. High pressure resistance, water hammer impact resistance, strong pressure bearing capacity.
5. The inner wall has a small moyang coefficient, small head loss, and reduced energy consumption for the same flow rate.Water conservancy comparison conclusion: TPEP anti-corrosion steel pipe saves 48% of head loss compared with ductile iron pipe, TPEP anti-corrosion steel pipe head is reduced, pump and motor power and electricity cost are saved, and the operating cost is greatly reduced.
6. The anti-corrosion thickness of the outer layer of 3PE is more than 2.5mm, wear-resistant and bump-resistant, and the anti-corrosion life can reach more than 50 years
7. The inner wall of TPEP anticorrosive steel pipe is smooth and non-scaling, with self-cleaning function, safe and hygienic, and meets the standard of direct drinking water.