Audited Supplier
JHI650M-3D0-4
Passive inverter
3kw
CE, ISO9001
DC/AC Inverters & AC/AC Inverters
Full-Bridge Type
Sine Wave Inverter
2.7A
0Hz~60Hz
380V AC 3phase
180-450V DC 3phase
185*125*160mm
KUVO
Carton
China
Product Description
Technical Features
♦Flexibility◊
◊Compatible with IEC standard three-phase asynchronous induction motors
◊Compatible with popular PV arrays
◊Grid supply option
♦Reliability
◊10-year market proven experience of leading motor and pump drive technology
◊Soft start feature to prevent water hammer and increase system life
◊Built-in overvoltage, overload, overheat and dry-run protection
♦Cost Effectiveness
◊Plug-and-play system design
◊Embedded motor protection and pump functions
◊Battery-free for most applications
◊Effortless maintenence
♦Smartness
◊Self-adaptive maximum power point tracking technology up to 99% efficiency
◊Automatic regulation of pump flow
◊Self-adaption to the motor used in the installation
♦Remote Monitoring
◊Standard RS485 interface equipped for each solar pump inverter
◊Optional GPRS/WIFI/Ethernet RJ45 modules for remote access
◊Spots value of solar pump parameters monitoring available from anywhere
◊History of solar pump parameters and events lookup support
◊Android/iOS monitoring APP support
Solar photovoltaic water pump inverter
Photovoltaic water pump system experts around you
Introduction of solar water pump system
Solar water pumping systems are used in remote areas where
there is no power supply or power shortage, Provide water solution, the system
uses DC power output from photovoltaic array to pump water,
The system does not need to install batteries, and can store water in the reservoir
for subsequent use,Other water sources, such as water storage
of rivers and lakes, can replace water storage.Product advantages
1.No fuel is required
2.Suitable for poor environment such as lack of power
3.Compatible with various pumps
4.Suitable for all Kings of three-phase asynchronous motor
5.Support various conventional solar modules
6.Support system wide power segment design
7.Compatible with brushless DC motor,adaptive parametersworking principle
AC Solar water pump system
SKP AC Solar water pump system is mainly composed of
photovoltaic array, installation system, combiner box, SKP solar
water pump controller, submersible/surface DC pump, water
level switch and reservoir (optional), as shown in the following circle.1.The system does not need batteries and is powered by solar energy, which is more economical and reliable.
2.The water storage tank is used for subsequent use.
3.The system uses high efficiency AC submersible / surface pump to meet different requirements.
4.The feature of the system is that the maximum power point tracking technology is used
to automatically adjust the pump operation to achieve the maximum power generation.
5.The system adopts automatic control technology, such as starting and closing
automaticaly in the morning and at night. When the pool is full and the well is short
of water, the system adopts protective measures to prevent the pump from stalling
and ensure the three-phase balance, so as to prolong the service life of the pump and the controller.
♦Flexibility◊
◊Compatible with IEC standard three-phase asynchronous induction motors
◊Compatible with popular PV arrays
◊Grid supply option
♦Reliability
◊10-year market proven experience of leading motor and pump drive technology
◊Soft start feature to prevent water hammer and increase system life
◊Built-in overvoltage, overload, overheat and dry-run protection
♦Cost Effectiveness
◊Plug-and-play system design
◊Embedded motor protection and pump functions
◊Battery-free for most applications
◊Effortless maintenence
♦Smartness
◊Self-adaptive maximum power point tracking technology up to 99% efficiency
◊Automatic regulation of pump flow
◊Self-adaption to the motor used in the installation
♦Remote Monitoring
◊Standard RS485 interface equipped for each solar pump inverter
◊Optional GPRS/WIFI/Ethernet RJ45 modules for remote access
◊Spots value of solar pump parameters monitoring available from anywhere
◊History of solar pump parameters and events lookup support
◊Android/iOS monitoring APP support
Solar photovoltaic water pump inverter
Photovoltaic water pump system experts around you
Introduction of solar water pump systemSolar water pumping systems are used in remote areas where
there is no power supply or power shortage, Provide water solution, the system
uses DC power output from photovoltaic array to pump water,
The system does not need to install batteries, and can store water in the reservoir
for subsequent use,Other water sources, such as water storage
of rivers and lakes, can replace water storage.
Product advantages1.No fuel is required
2.Suitable for poor environment such as lack of power
3.Compatible with various pumps
4.Suitable for all Kings of three-phase asynchronous motor
5.Support various conventional solar modules
6.Support system wide power segment design
7.Compatible with brushless DC motor,adaptive parametersworking principle
AC Solar water pump system
SKP AC Solar water pump system is mainly composed of
photovoltaic array, installation system, combiner box, SKP solar
water pump controller, submersible/surface DC pump, water
level switch and reservoir (optional), as shown in the following circle.
1.The system does not need batteries and is powered by solar energy, which is more economical and reliable.2.The water storage tank is used for subsequent use.
3.The system uses high efficiency AC submersible / surface pump to meet different requirements.
4.The feature of the system is that the maximum power point tracking technology is used
to automatically adjust the pump operation to achieve the maximum power generation.
5.The system adopts automatic control technology, such as starting and closing
automaticaly in the morning and at night. When the pool is full and the well is short
of water, the system adopts protective measures to prevent the pump from stalling
and ensure the three-phase balance, so as to prolong the service life of the pump and the controller.
