Audited Supplier
S604GP-2G
Full-Duplex & Half-Duplex
Ethernet Switch
10/100/1000Mbps
≦8
IP40
POEPLUS
Carton Box
115x86x30mm
China
8517623200
Product Description
4 Ports Full Gigabit POE Switch
Product Description:
The S604GP-2G is a full Gigabit unmanaged POE switch, which provides four DATA+POE interfaces and two data interface. Among them, port 1 support HI-POE max 60w output and 2-4 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps and 1000Mbps.
The S604GP-2G is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.
The S604GP-2G adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-4 ports cannot communicate with each other, only through port 5-6 to output data. This mode can effectively suppress the generation of broadcast storms.
Product Features:
Product Description:
The S604GP-2G is a full Gigabit unmanaged POE switch, which provides four DATA+POE interfaces and two data interface. Among them, port 1 support HI-POE max 60w output and 2-4 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps and 1000Mbps.
The S604GP-2G is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.
The S604GP-2G adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-4 ports cannot communicate with each other, only through port 5-6 to output data. This mode can effectively suppress the generation of broadcast storms.
Product Features:
- Ports 1 max 60w POE output
- Support POE watchdog function,When a port goes down or the response becomes slow, the port can be automatically restarted to reactivate the PD device
- Comply with IEEE 802.3, 802.3i, 802.3u, 802.3ab, 802.3x, 802.3q, 802.3af/at specifications.
- 6*10/100/1000Mbps interface, support for auto-negotiation.
- 4*10/100/1000Mbps POE interface, support 802.3af/at standard, maximum 30w power output.
- Adopt high-speed Store-and-Forward transmission mode.
- Support 9k jumbo frames
- Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
- 2.4K Mac address table
- One DIP switch supports port isolation setting.
- Port status LEDs
DATASHEET
| Model | S604GP-2G |
| Product | 4+2 Port Full Gigabit PoE Switch |
| Fixed Port | 4*10/100/1000Base-TX PoE port(Data/Power) 2*10/100/1000Base-TX uplink RJ45 port (Data) |
| PoE Ports | 1-4 port supports PoE |
| Function | N: Standard normal V:1-4 Port isolation S:Max 250m POE transmission |
| Network Protocol | IEEE 802.3 IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab1000BASE-T IEEE 802.3x IEEE 802.3af/at |
| PoE Standard | IEEE802.3af/at |
| Port Specification | 10/100/1000BaseT(X)Auto |
| Transmission Mode | Store and Forward (full wire speed) |
| Bandwidth | 12Gbps |
| Packet Forwarding | 7.2Mpps |
| MAC Address | 2.4K |
| Buffer | 2.5M |
| Transmission Distance | 10BASE-T : Cat3,4,5 UTP (≤250 meter) 100BASE-TX : Cat5 or later UTP (150 meter) 1000BASE-TX : Cat6 or later UTP (100 meter) |
| Power Pin | Default 1/2(+),3/6(-);Optional order 4/5(+),7/8(-) |
| Single port power | Average 15.4W;MAX 30W |
| Total power/Input voltage | MAX 65W (AC100-240V 50/60HZ) |
| Watt | Standby Power Consumption:≤5W; |
| LED Indicator | Power:Power LED Uplink:(Link LED=10/100M Link,1000M=Gigabit Link) Port:(Orange=PoE LED+Green=Link LED) Vlan:(Port Isolation LED) |
| Power Input | Built-in power AC:100~240V 50-60Hz 1A |
| Operating Temperature/Humidity | -10~+55°C;5%~90% RH Non coagulation |
| Storage Temperature/Humidity | -40~+75°C;5%~95% RH Non coagulation |
| Product size/Packing size | 190mm*130mm*35mm 305mm*205mm*55mm(L*W*H) |
| N.W/G.W(kg) | 0.6kg/0.9kg |
| Installation | Desktop (optional wall hanger parts) |
| Lightning protection level | 3KV 8/20us; IP30 |
| Certificate | CE mark, commercial;CE/LVD EN60950; FCC Part 15 Class B;RoHS; |
| Warranty | Whole device for 1 year(Accessories not included) |
