Audited Supplier
CC5312
Booster Cable
Battery Charger
Steel
Yes
Standard
3000PCS
Super Care
Standard Export Carton
400Amp, 2.5m
Ningbo, China
8544421100
Product Description
Products Detail
Why choose us?
How to Jump a car
Step 1
Drive the running automobile as close as you can to the car with the dead battery, hood to hood if possible.
Step 2
Turn off the engines and power of both cars, put them in park and raise their hoods.
Step 3
Locate the battery in each car and the positive and negative terminals.
Step 4
Wipe the area around the terminals clear of dirt and battery acid, being careful not to allow it to come in contact with your skin.
Step 5
Connect one clamp of one end of the jumper cable to the positive terminal of the dead battery. Then connect the corresponding clamp at the other end to the positive terminal of the good battery.
Step 6
Connect the other cable clamp to the negative terminal of the dead battery. Then, connect the other end to the negative terminal of the good battery.
Step 7
Turn the ignition on of the car with the good battery. Make certain that the lights and radio are off. Allow the car to run for a few minutes, then turn it off.
Step 8
Attempt to start the dead battery car.
Step 9
Turn the functioning car on again. If the dead battery didn't kick start the car, while the functioning car was off, you need to turn on the ignition while the car is running. Give the good car a moment or two to charge the batteries, then start the car with the bad battery as you normally would. It should turn right over.
Contact us
Ningbo Super Clean Co.,Ltd.
ADD: No.1, HouCang Industry Zone,
West Section Yinxian Road, Ningbo China(315153)
TEL:0086-574-89020080,89020081
FAX:0086-574-88255300
Mobile:0086-13858225192
nbsuperclean.en.made-in-china.com
| Type: | Booster Cable/Emergency Battery Cables/Jump Cables |
| Item Number: | CC5312 |
| Material: | Clamp: Steel Coated with PE or PVC,Wire: Copper Claded Aluminum with TPR/PVC cover |
| Size: | Standard |
| MOQ: | 3000pcs |
| Logo: | Customized |
| Color: | Usually,black and red or OEM |
| Usage: | Emergency tool when the battery is dead |
| Sample Time: | 3-5days |
| Production Time: | 35days after deposit |
| Payment Term: | T/T,L/C,D/P,WESTERN UNION |
Why choose us?
How to Jump a car
Step 1
Drive the running automobile as close as you can to the car with the dead battery, hood to hood if possible.
Step 2
Turn off the engines and power of both cars, put them in park and raise their hoods.
Step 3
Locate the battery in each car and the positive and negative terminals.
Step 4
Wipe the area around the terminals clear of dirt and battery acid, being careful not to allow it to come in contact with your skin.
Step 5
Connect one clamp of one end of the jumper cable to the positive terminal of the dead battery. Then connect the corresponding clamp at the other end to the positive terminal of the good battery.
Step 6
Connect the other cable clamp to the negative terminal of the dead battery. Then, connect the other end to the negative terminal of the good battery.
Step 7
Turn the ignition on of the car with the good battery. Make certain that the lights and radio are off. Allow the car to run for a few minutes, then turn it off.
Step 8
Attempt to start the dead battery car.
Step 9
Turn the functioning car on again. If the dead battery didn't kick start the car, while the functioning car was off, you need to turn on the ignition while the car is running. Give the good car a moment or two to charge the batteries, then start the car with the bad battery as you normally would. It should turn right over.
Contact us
Ningbo Super Clean Co.,Ltd.
ADD: No.1, HouCang Industry Zone,
West Section Yinxian Road, Ningbo China(315153)
TEL:0086-574-89020080,89020081
FAX:0086-574-88255300
Mobile:0086-13858225192
nbsuperclean.en.made-in-china.com
