500lph RO Plant Water Purifier Machine Reverse Osmosis Systems Drinking Water Filtration

500LPH RO Plant Water Purifier Machine Reverse Osmosis Systems Drinking Water Filtration
 
Product Introduction of RO Water Treatment System

RO equipment is reverse osmosis equipment. Reverse osmosis equipment passes raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes through pumps. 1/6000, 1/300 of the virus) reverse osmosis membrane (RO membrane), so that the higher concentration of water into low concentration water, while industrial pollutants, heavy metals, bacteria, viruses and other impurities mixed into the water are all isolated , so as to achieve drinking.

The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to a pressure of 6-20 kg, the raw water permeates through the reverse osmosis membrane with a pore size of only 0.0001 microns under the action of pressure. Chemical ions, bacteria, fungi, and virions cannot pass through, and are discharged with wastewater. Only water molecules and solvents with a volume of less than 0.0001 microns are allowed to pass through.

Product Accessories Display of 500LPH RO Water Treatment System

Technical Specifications of 500LPH RO Water Treatment System

 
Advantages of RO water treatment system:
Reverse osmosis equipment belongs to physical desalting method, which has many advantages.
1) Non-phase-change physical method was used to desalinate and purify the saline water under norma temperature.
2) Desalting rate of single membrane element is 99.3% and can remove colloid, organics, bacteria, virus and all kinds of heavy metals in water at the same time.
3) With water pressure as the driving force, energy consumption is the lowest among many treatment methods.
4) No need for large amount of chemical treatment, no elimination of chemical waste liquid, no environmental pollution, and the recovery rate is over 70%.
5) High automation program, automatic stop in case of ailure, with automatic protection function.
6) The system is simple, easy to operate, and the water quality is stable.
7) Equipment covers small area, compact structure, reliable operation and high water quality.
 
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Two Stage reverse osmosis → ultraviolet sterilization device → water point.
 

Reverse Osmosis Ssystem Product Application Display
https://xajufu.en.made-in-china.com/product-list-1.html
Packaging and Logistics

Company Exhibition

 JUFU's Five Guarantees

 JUFU's Business Partner

 FAQ:
 
1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)
 
Model 4040 is designed by 0.25m3/h
 
Model 8040 is designed by 1-1.2m3/h
 
2. What is the material of mechanical filter?
 
Carbon steel, stainless steel, fiberglass
 
3.What are the multi-way control valves?
 
Manual control valve, automatic control valve
 
Multi - way control valve is divided into: filter valve and softening valve
 
Automatic control valve is divided into: time type and flow type.
 
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.