Audited Supplier
XY-004
Video Technical Support, Online Support
1 Yeay
Flatbed Printer
Multi-Colour
Semi-Automatic
10min
Pin-on
Platen Press
Continuous
Transfer Print
Real Thick Plate
50*70cm
80kg
Manual
Refine
Export Standar Cartons
CE
Hefei, Anhui, China
84513000
Product Description
50*70cm T-shirt Heat Transfer Printer T Shirt High Pressure Heat Press Machine
| Work Size | 50*70cm |
| Voltage | 110/220V |
| 110/220V | 110/220V |
| Temperature | 0-399°C |
| Time for heating up | 10-15 minutes |
| Packing Size | 82*80*47cm |
| Gross Weight | 80KG |
Please Note:1. Be careful of the hot heating surface
2. Please make sure the heating temperature and transfer time are correct
3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.
5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.
6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.
Common Printing Failures And Their Possible Reasons
1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.
2. The design is indistinct: the time is too long which led to ink diffusion.
3. The design has no luster: the pressure is too high; OR the temperature is too high.
4. Part of design is indistinct: heat printing zone OR the heating is not even.
5. Scar on design: heat printing time is too long.
6. Depth of color is not the same: pressure not even OR the coating is not even.
7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.
8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
