Audited Supplier
SHPV-560
Installation,Comissioning, Technical Guide etc
5
New
API, ISO, CE
Home, Industrial, Commercial, Centrailization
Normal
Sanhe
Container
2278x1134x30mm
China
8541402000
Product Description
Product : 560-580W N-type Bifacial High Efficiency Mono Silicon Solar Panel with dual glass
Introduction:N-type Bifacial High Efficiency Mono Silicon Double Glass Solar Panel
Model :SHPV-560
Installation: roof/land
Brand: Sanhe/Others
Features:
Super Multi Busbar Tech:optimal light trapping and current collection to optimize module power output and reliability.
Lower LID/LETID: type module with Hot 2.0 technology
Anti-PID performance: optimize mass-production process and materials control.
Typhoon protection: wind load (2400 Pascal) and snow load (5400 Pascal).
At least 30-year product life,
More than 10%- 30% additional power gain comparing with conventional module
Lower LCOE : High power and 1500V system voltage,saving BOS cost
Wide spectral response: higher power output under bad sunlight condition like smog or cloudy days
Wider Applicability :BIPV,vertical installation, snowfield, high-humid area, windy and dusty area
Electrical Specification / STC/NOCT*
*STC: Irradiance 1000 W/m², Cell Temperature 25°C, AM1.5
The data above is for reference only and the actual data is in accordance with the pratical testing
*NOCT:Irradiation on the solar panel = 800W/m2, Wind velocity = 1 m/s, and Ambient temperature = 20°C.
Operating Specification
*Bifaciality=Pmaxrear(STC)/Pmaxfront(STC) ,Bifaciality tolerance:±5%
Temperature Coefficient Specification
*Temperature Coefficient of Pmax±0.03%/ºC
Mechanical Specification
*Heat strengthened glass
*Cable length can be customized
Packaging Specification
Specifications included in this datasheet are subject to change without notice.
Project
Shenzhen Aoxia residential on-grid PV project is a typical urban village energy renovation.Its design capacity is 325.96kW, AEP is up to 410,000kW.h, expecting to reduce CO2 emission by 382.9 tons/year. The complicated site condition proves Sanhe professional engineering ability. The buildings were built in the 1980s. We customized an all-light steel structure satisfying building load and passed the mechanical test. It covers N-type monocrystalline silicon bifacial solar modules, solar inverters, grid switchgear etc.Sanhe provided one-stop solution covering feasibility analysis,design,products supply and installation,maintenance etc.
Introduction:N-type Bifacial High Efficiency Mono Silicon Double Glass Solar Panel
Model :SHPV-560
Installation: roof/land
Brand: Sanhe/Others
Features:
Super Multi Busbar Tech:optimal light trapping and current collection to optimize module power output and reliability.
Lower LID/LETID: type module with Hot 2.0 technology
Anti-PID performance: optimize mass-production process and materials control.
Typhoon protection: wind load (2400 Pascal) and snow load (5400 Pascal).
At least 30-year product life,
More than 10%- 30% additional power gain comparing with conventional module
Lower LCOE : High power and 1500V system voltage,saving BOS cost
Wide spectral response: higher power output under bad sunlight condition like smog or cloudy days
Wider Applicability :BIPV,vertical installation, snowfield, high-humid area, windy and dusty area
Electrical Specification / STC/NOCT*
| Testing Condition Front side | STC | NOCT | STC | NOCT | STC | NOCT | STC | NOCT | STC | NOCT |
| Peak Power(Pmax)(Wp) | 560 | 421 | 565 | 425 | 570 | 429 | 575 | 432 | 580 | 436 |
| MPP Voltage(Vmp)(V) | 41.95 | 39.39 | 42.14 | 39.52 | 42.29 | 39.65 | 42.44 | 39.78 | 42.59 | 39.87 |
| MPP Current(Imp)(A) | 13.35 | 10.69 | 13.41 | 10.75 | 13.48 | 10.81 | 13.55 | 10.87 | 13.62 | 10.94 |
| Open Circuit Voltage(Voc)(V) | 50.67 | 48.13 | 50.87 | 48.32 | 51.07 | 48.51 | 51.27 | 48.7 | 51.47 | 48.89 |
| Short Circuit Current(Isc)(A) | 14.13 | 11.41 | 14.19 | 11.46 | 14.25 | 11.50 | 14.31 | 11.55 | 14.37 | 11.60 |
| Module Efficiency(%) | 21.68 | 21.87 | 22.07 | 22.26 | 22.45 | |||||
The data above is for reference only and the actual data is in accordance with the pratical testing
*NOCT:Irradiation on the solar panel = 800W/m2, Wind velocity = 1 m/s, and Ambient temperature = 20°C.
Operating Specification
| Operating Temperature(ºC) | -40ºC~+85ºC |
| Maximum System Voltage(V) | 1500VDC(IEC) |
| Maximum Series Fuse Rating(A) | 30A |
| Power Tolerance | 0~+3%W |
| Bifaciality* | 80%±5% |
*Bifaciality=Pmaxrear(STC)/Pmaxfront(STC) ,Bifaciality tolerance:±5%
Temperature Coefficient Specification
| Temperature Coefficient of Pmax* | -0.29%/ºC |
| Temperature Coefficient of Voc | -0.25%/ºC |
| Temperature Coefficient of Isc | +0.045%/ºC |
| Nominal Operating Cell Temperature (NOCT) | 45±2ºC |
Mechanical Specification
| Cell Type | N-TOPCon Mono-crystalline |
| Number of Cells | 144(2*72) |
| Dimension | 2278×1134×30mm (89.69×44.65×1.18 inch) |
| Weight | 32 kg (70.55 lbs) |
| Front /Rear Glass* | 2.0mm, Anti-Reflection Coating/2.0mm, Heat Strengthened Glass |
| Frame | Anodized Aluminium Alloy |
| Junction Box | IP68(3 diodes) |
| Length of Cable* | 4.0mm²,200mm or Customized Length |
| Connector | MC4 Compatible |
| Mechanical load | 5400Pa |
| Wind load | 2400Pa |
| Insulation resistance | >40MΩ/m2 |
| Withstand voltage | 1500V |
*Cable length can be customized
Packaging Specification
| Packing Type | 20'GP | 40'GP | 40'HQ |
| Piece/Pallet | 36 | ||
| Pallet/Container | 5 | 10 | 20 |
| Piece/Container | 175 | 350 | 720 |
Specifications included in this datasheet are subject to change without notice.
Project
Shenzhen Aoxia residential on-grid PV project is a typical urban village energy renovation.Its design capacity is 325.96kW, AEP is up to 410,000kW.h, expecting to reduce CO2 emission by 382.9 tons/year. The complicated site condition proves Sanhe professional engineering ability. The buildings were built in the 1980s. We customized an all-light steel structure satisfying building load and passed the mechanical test. It covers N-type monocrystalline silicon bifacial solar modules, solar inverters, grid switchgear etc.Sanhe provided one-stop solution covering feasibility analysis,design,products supply and installation,maintenance etc.
