Audited Supplier
GW-JN6
20-6000MHz
20-6000MHz
Gas Station
1570-1580MHz
Meeting Room
Greetwin
Neutral Packing
ISO9001
Shenzhen
8517699000
Product Description
6 Channels Portable Signal Jammer Cell Phone GPS WiFi Jammer (GW-JN6)
Features:
1. Pocket-sized and portable design with cooling fan.
2. ON/OFF switch make it more user-friendly
3. Cooling fan inside, Rechargeable battery and car charger
4. Six channels with different frequency range,
Or customize other cellular standard in the world.
Such as 450MHz, GPRS, iDEN, GPS, UMTS, WiFi, AWS, 4G.
5. Multiple bands, Can adjust ON or turn off any single band without influencing the other bands operation
You can select these frequencies:
CDMA/GSM, DCS/PCS, 3G, 4G LTE/WIMAX, WIFI 2.4G, GPS, LOJACK
Package Included:
1pc Portable Wireless Signal Jammer
1pc Power Adapter (100-240V)
1pc Car Charger
1pc Manual
Applications:
Meeting room, conference room, museum, gallery, theatre, concert hall, church, temple, restaurant, classroom, training center, factory, bank, train, bus, etc. For some locations of special purpose such hospital, gas station, Etc
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.
*Click it to get the sample.
Features:
1. Pocket-sized and portable design with cooling fan.
2. ON/OFF switch make it more user-friendly
3. Cooling fan inside, Rechargeable battery and car charger
4. Six channels with different frequency range,
Or customize other cellular standard in the world.
Such as 450MHz, GPRS, iDEN, GPS, UMTS, WiFi, AWS, 4G.
5. Multiple bands, Can adjust ON or turn off any single band without influencing the other bands operation
You can select these frequencies:
CDMA/GSM, DCS/PCS, 3G, 4G LTE/WIMAX, WIFI 2.4G, GPS, LOJACK
Package Included:
1pc Portable Wireless Signal Jammer
1pc Power Adapter (100-240V)
1pc Car Charger
1pc Manual
Applications:
Meeting room, conference room, museum, gallery, theatre, concert hall, church, temple, restaurant, classroom, training center, factory, bank, train, bus, etc. For some locations of special purpose such hospital, gas station, Etc
| Output port | Frequency | Average output power | Jamming range(radius): 1-20m (Depend on local signal intensity) |
| CDMA | 851-894MHz | 500mw | |
| GSM | 925-960MHz | 500mw | |
| DCS/PCS | 1805-1880MHz/1930-1990MHz | 500mw | |
| 3G | 2110-2170MHz | 500mw | |
| GPS | 1570-1580MHz | 500mw | |
| Wifi | 2400-2500MHz | 500mw | |
| Power supply: 50 to 60Hz, AC 100 to 240V With AC adapter (AC100-240V-DC12V),4000mA/H battery | |||
| Weight: 650g Dimension: 126x76x35mm and not include antennas Inner box dimension:220x202x65mm | |||
| Output power: 3w 6pcs External omni antennas | |||
| Charge full time about 4Hours, Working time:1-2Hours. Running temperature: -10 to +55'C | |||
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.
Q1.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please Contact us with more details.
Q2.Delivery Date&Lead Time
| Quantity | Lead time | Delivery to American/Middle East/Asia/Europe |
| <20 pcs | 3-5 business days | 3-7 business days by DHL 5-7 business days by FedEx/UPS |
| 20-100 pcs | 7-15 business days | |
| >100 pcs | 15-24 business days |
Q3. Can I customize frequencies?
Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.
Q4. What should I do if I don't know about frequency in my country?
Please feel free to Contact us with your inquiry, we will find the frequency you need and address your problems.
More signal repeater please CLICK it!
360° Full View of Factory Evaluation
