Audited Supplier
Cutting star
Online Technical Support
I Year
Home Appliance, Environmental Equipment, Petroleum Machinery Manufacturing, Agriculture Machinery, Textile Machinery, Food Machinery, Aerospace Industry, Automotive Industry
Water Cooling
Continuous Wave Laser
Metal
Gantry Type
Free Electron Laser
Laser Control Fault Cutting
4.5t-7t
1000-6000W
Pmac Full Closed Loop Servo Control
Ipg or Chuangxin or Ryko
2.8-3.6mm X Mrad
6000mm * 2500mm
6000mm
2500mm
100mm
±0.05mm/M
±0.03mm/M
Tianyi
Wooden Case
Negotiable
Changsha, China
Product Description
6025 High speed 1000W 1500w 3000w 4000w 6000W laser Fiber cutting machine exchange platforms for metal
Choose Chuangxin fiber laser generator
High electro-optical conversion rate
Excellent beam quality
Long service life
Low cost of comprehensive use
Maintenance free
High electro-optical conversion rate
Excellent beam quality
Long service life
Low cost of comprehensive use
Maintenance free
Inovance servo motor
High stability, high precision and maintenance free.
High precision. back clearance less than 3 arc minutes, accurate positioning.
High rigidity, high torque.The use of integral roller bearings, greatly improve the rigidity and torque.
No grease leakage. The use of high viscosity, not easy to separate grease, effectively prevent grease leakage.
Easy maintenance, no need to replace the grease during the life of the product.
High stability, high precision and maintenance free.
High precision. back clearance less than 3 arc minutes, accurate positioning.
High rigidity, high torque.The use of integral roller bearings, greatly improve the rigidity and torque.
No grease leakage. The use of high viscosity, not easy to separate grease, effectively prevent grease leakage.
Easy maintenance, no need to replace the grease during the life of the product.
| 1.5 kw | Material category | Carbon steel | Stainless steel | Aluminum alloy | Brass | Red copper | |||
| Cutting speed m/min | Material thickness (mm) | O2 | Nitrogen | Air Air | N2 nitrogen | Air Air | N2 nitrogen | N2 nitrogen | O2 Oxygen |
| (Oxygen focusing) | |||||||||
| 1 | 6.0-8.0 | 18.0-20.0 | 18.0-20.0 | 18.0-20.0 | 18.0-20.0 | 18.0-20.0 | 18.0-20.0 | / | |
| 2 | 5.0-6.0 | 8.0-10.0 | 8.0-10.0 | 8.0-10.0 | 8.0-10.0 | 10.0-14.0 | 10.0-12.0 | / | |
| 3 | 3.8-4.2 | / | / | 5.6-6.7 | 5.6-6.7 | 6.0-8.0 | 4.0-5.0 | / | |
| 4 | 3.0-3.4 | / | / | 3.8-4.0 | 3.8-4.0 | 3.0-4.0 | 2.5-3.0 | / | |
| 5 | 2.9-3.3 | / | / | 2.0-2.2 | 2.0-2.2 | 2.1-2.5 | 1.5-2.0 | / | |
| 6 | 2.4-2.6 | / | / | 1.2-1.4 | 1.2-1.4 | 1.7-2.0 | / | ||
| 8 | 1.4-1.6 | / | / | / | / | / | / | / | |
| 10 | 1.0-1.2 | / | / | / | / | / | / | / | |
| 12 | 0.9-1.1 | / | / | / | / | / | / | / | |
| 14 | 0.7-0.9 | / | / | / | / | / | / | / | |
| 16 | 0.5-0.6 | / | / | / | / | / | / | / | |
| 18 | / | / | / | / | / | / | / | / | |
| 20 | / | / | / | / | / | / | / | / | |
| Note: 1. The above cutting parameters are the factory test data of the equipment, for reference; (marked in red is the limit) | |||||||||
| 2. Auxiliary gas is air, when cutting stainless steel, with 15KW air system. | |||||||||
| 3KW | Material class | Carbon steel | Stainless steel | Aluminum alloy | Brass | Red copper | |||
| Cutting speed m/min | Material thickness (mm) | O2 | Nitrogen | Air Air | N2 nitrogen | Air Air | N2 nitrogen | N2 nitrogen | O2 Oxygen |
| (oxygen focus) | |||||||||
| 1 | 7.0-10.0 | 30.0-40.0 | 30.0-35.0 | 30.0-35.0 | 30.0-35.0 | 30.0-35.0 | 18.0-20.0 | / | |
| 2 | 5.0-6.5 | 15.0-18.0 | 15.0-18.0 | 15.0-23.0 | 15.0-23.0 | 12.0-18.0 | 9.0-12.0 | / | |
| 3 | 3.5-5.0 | 6.0-9.0 | 6.0-9.0 | 7.0-11.0 | 7.0-11.0 | 6.5-10.0 | 4.0-6.0 | / | |
| 4 | 3.0-4.2 | / | / | 4.0-6.5 | 3.5-5.0 | 2.5-4.0 | / | ||
| 5 | 2.5-3.5 | / | / | 2.5-4.0 | 2.5-3.5 | 1.5-2.0 | / | ||
| 6 | 2.4-3.0 | / | / | 2.0-3.2 | 1.8-3.0 | 1.0-1.3 | / | ||
| 8 | 1.8-2.4 | / | / | 1.2-1.8 | 0.9-1.3 | / | / | ||
| 10 | 1.2-1.8 | / | / | 0.5-0.8 | 0.6-0.8 | / | / | ||
| 12 | 1.0-1.5 | / | / | / | / | / | / | ||
| 14 | 0.8-1.0 | / | / | / | / | / | / | ||
| 16 | 0.7-0.85 | / | / | / | / | / | / | ||
| 18 | 0.6-0.8 | / | / | / | / | / | / | ||
| 20 | 0.5-0.65 | / | / | / | / | / | / | ||
| Note: 1. The above cutting parameters are the factory test data of the equipment, for reference; (marked in red is the limit) | |||||||||
| 2. Auxiliary gas is air, when cutting stainless steel, with 15KW air system. | |||||||||
| 4KW | Material category | Carbon steel | Stainless steel | Aluminum alloy | Brass | Red copper | |||
| Cutting speed m/min | Material thickness (mm) | O2 | Nitrogen | Air Air | N2 nitrogen | Air Air | N2 nitrogen | N2 nitrogen | O2 Oxygen |
| (Oxygen focusing) | |||||||||
| 1 | 7.0-10.0 | 20.0-30.0 | 25.0-35.0 | 25.0-35.0 | 25.0-35.0 | 18.0-20.0 | 18.0-20.0 | ||
| 2 | 5.5-6.5 | 16.0-19.0 | 16.0-19.0 | 17.0-25.0 | 16.0-20.0 | 13.0-15.0 | 9.0-12.0 | ||
| 3 | 3.8-4.5 | 10.0-12.0 | 10.0-12.0 | 10.0-15.0 | 7.0-13.0 | 6.0-6.5 | 5.0-6.0 | ||
| 4 | 3.3-3.8 | 4.5-7.0 | 4.5-7.0 | 5.0-7.5 | 4.0-5.5 | 4.0-4.5 | 3.5-4.5 | ||
| 5 | 3.0-3.6 | / | / | 4.0-5.0 | 3.0-4.0 | 2.5-3.0 | 1.5-2.5 | ||
| 6 | 2.6-2.9 | / | / | 3.0-4.0 | 2.2-3.5 | 1.7-2.0 | / | ||
| 8 | 2.4-2.6 | / | / | 1.5-2.6 | 1.0-1.6 | 0.7-0.9 | / | ||
| 10 | 1.8-2.1 | / | / | 0.8-1.3 | 0.6-1.0 | / | / | ||
| 12 | 1.1-1.6 | / | / | 0.6-0.8 | 0.3-0.4 | / | / | ||
| 14 | 0.8-1.0 | / | / | 0.2-0.3 | 0.2-0.3 | / | / | ||
| 16 | 0.7-0.9 | / | / | / | / | / | / | ||
| 18 | 0.6-0.8 | / | / | / | / | / | / | ||
| 20 | 0.5-0.6 | / | / | / | / | / | / | ||
| Note: 1. The above cutting parameters are the factory test data of the equipment, for reference; (marked in red is the limit) | |||||||||
| 2. Auxiliary gas is air, when cutting stainless steel, with 15KW air system. | |||||||||
| 6KW | Material category | Carbon steel | Stainless steel | Aluminum alloy | Brass | Red copper | |||
| Cutting speed m/min | Material thickness (mm) | O2 | Mix | Air | N2 | Air | N2 | N2 | O2 |
| (Oxygen focus) | (Mixture/nitrogen maker) | ||||||||
| 1 | 7.0-10.0 | 30.0-50.0 | 30.0-50.0 | 30.0-50.0 | 30.0-50.0 | 30.0-50.0 | 30.0-50.0 | 23.0-25.0 | |
| 2 | 5.0-7.0 | 25.0-30.0 | 25.0-30.0 | 20.0-30.0 | 20.0-30.0 | 20.0-30.0 | 20.0-24.0 | 12.0-15.0 | |
| 3 | 4.5-6.0 | 15.0-17.0 | / | 15.0-17.0 | 15.0-18.0 | 15.0-17.0 | 12.0-15.0 | 6.0-8.0 | |
| 4 | 3.5-3.9 | 10.0-12.0 | / | 10.0-12.0 | 10.0-13.0 | 10.0-12.0 | 8.0-10.0 | 4.0-5.0 | |
| 5 | 3.2-3.5 | 6.5-7.3 | / | 6.5-8.0 | 6.5-9.0 | 6.5-7.3 | 5.0-6.5 | 2.5-3.0 | |
| 6 | 2.9-3.2 | 4.5-6.0 | / | 4.5-6.0 | 4.5-7.0 | 4.5-6.0 | 3.0-4.5 | 2.0-2.5 | |
| 8 | 2.5-2.7 | / | / | 3.0-3.5 | 3.0-4.0 | 3.0-3.5 | 1.2-1.8 | 1.0-1.5 | |
| 10 | 1.9-2.2 | / | / | 2.2-2.5 | 2.2-3.0 | 2.2-2.5 | 0.9-1.2 | ||
| 12 | 1.8-2.1 | / | / | 1.6-1.9 | 1.6-2.0 | 1.7-1.9 | / | / | |
| 14 | 1.4-1.8 | / | / | 0.8-1.3 | 0.8-1.4 | 0.8-1.0 | / | / | |
| 16 | 1.3-1.6 | / | / | 0.7-0.9 | 0.7-1.0 | 0.6-0.8 | / | / | |
| 18 | 0.8-1.2 | / | / | 0.5-0.65 | / | / | / | ||
| 20 | 0.6-0.8 | / | / | / | / | / | |||
| 25 | 0.2-0.3 | / | / | / | / | / | / | / | |
| Note: 1. The above cutting parameters are the factory test data of the equipment, for reference; (marked in red is the limit) | |||||||||
| 2. Auxiliary gas is air, when cutting stainless steel, with 15KW air system. | |||||||||
About Us
Established in 1992, Tianyi has evolved over the past three decades to become a frontrunner in the welding and cutting industry. As a multifaceted welding conglomerate, Tianyi specializes in the development of cutting-edge welding technology, the crafting of intelligent equipment, and the advancement of superior welding products. Our extensive expertise spans the creation of internet-based welding software management systems, comprehensive training, certification consulting, and meticulous testing services. With eight subsidiary companies, three expansive manufacturing bases, and five state-of-the-art research and technology platforms, Tianyi is at the industry's forefront. We pride ourselves on our team of 300 technical experts and an impressive portfolio of over 100 patents. Generating sales exceeding 100 million dollars, Tianyi serves a vast clientele and collaborates with renowned corporations such as Panasonic (Tangshan), Fronius, and Messer, among others. Our brand enjoys a stellar reputation, both within China and internationally.
