Audited Supplier
618H
Telephone 24-Hour Service
One Year
Surface Grinding Machine
Gear
Grinding Wheel
Artificial
Manual
Surface Grinding Machine
High Precision
CE, ISO 9001
New
POLEDA
Wooden Frame
1350*1050*1850mm
China
84601100
Product Description
Mechanical prof perties
Machine structure: The main castings of the machine are made of high-grade cast iron, and through annealing treatment, to eliminate internal stress, to ensure high precision, high rigidity, and extend the life of the machine. Slide way: The machine left and right and front double V slide way adhesive wear-resistant resin TI URCITE-B, and precision shovel flower, not only smooth sliding and wear-resistant, the most suitable for forming and grinding.
Cylindrical straight spindle: The machine adopts P4 ultra-precision angular roller bearing, low noise, no vibration, large torque under high-speed rotation, suitable for heavy cutting and all kinds of forming grinding.
Automatic lubrication system: the use of circulating automatic lubrication system. When the main spindle starts, the lubricating oil automatically circulates immediately to provide forced lubrication for each screw and slide, which can greatly reduce the wear degree of slide. An oil mirror is installed above the column to monitor the lubrication condition.
Machine structure: The main castings of the machine are made of high-grade cast iron, and through annealing treatment, to eliminate internal stress, to ensure high precision, high rigidity, and extend the life of the machine. Slide way: The machine left and right and front double V slide way adhesive wear-resistant resin TI URCITE-B, and precision shovel flower, not only smooth sliding and wear-resistant, the most suitable for forming and grinding.
Cylindrical straight spindle: The machine adopts P4 ultra-precision angular roller bearing, low noise, no vibration, large torque under high-speed rotation, suitable for heavy cutting and all kinds of forming grinding.
Automatic lubrication system: the use of circulating automatic lubrication system. When the main spindle starts, the lubricating oil automatically circulates immediately to provide forced lubrication for each screw and slide, which can greatly reduce the wear degree of slide. An oil mirror is installed above the column to monitor the lubrication condition.
| Product Name | ||||
| Product Name | Grinding machine | |||
| Product model | 618 | |||
| Product technical parameters | ||||
| 1 Table size | 150*450MM(6*18'') | |||
| 2 Maximum grinding length | 475MM(18-3/4'') | |||
| 3 Maximum grinding width | 160MM(6-1/3'') | |||
| 4 Distance between spindle center and table surface | 350-400MM(13.8-15.7'') | |||
| 5 Standard disk size | 150*350MM | |||
| 6 Left and right feed/manual stroke | 485MM(19'') | |||
| 7 Front and rear feed/manual stroke | 160MM(7'') | |||
| 8 Hand wheel feed (per turn) | 5MM(0.2'') | |||
| 9 Hand wheel feed | 0.02MM(0.001'') | |||
| 10 Lift feed/hand wheel feed per scale | 0.005MM(0.0002'') | |||
| 11 Grinding wheel size (diameter * width * aperture) | 180*16*31.75MM(7*2/3*1-1/4'') | |||
| 12 Spindle speed (50/60HZ) | 2800RPM | |||
| 13 Spindle motor | 1.5HP | |||
| 14 Weight (approximate) | 800kgs | |||
| 15Machine size (L * W * H) | 1350*1050*1850MM | |||
| Grinding machine configuration | Accessories name and specification | quantity | ||
Standard parts for machine tools | 1,Grinding wheel and flange | 1 | ||
| 2,Wheel removal wrench | 1 | |||
| 3,Hexagonal wrench | 1 | |||
| 4,Leveling screws and foot pads | 1 | |||
| 5,Grinder guide oil | 1 | |||
| 6,Toolbox and adjustment tools | 1 | |||
| 7,Hanging rings | 1 | |||
| 8,Grinding wheel | 1 | |||
| Special parts for machine tools | 9,Grating electronic ruler | 1 | ||
| 10,Detail disk | 1 | |||
