Audited Supplier
Special Casting
Metal
Cast Iron
Permanent
Galvanized
Ra6.3
Sodium silicate
+/-0.01mm
AISI
CE, RoHS, ISO 9001:2000, ISO 9001:2008
Customized
PLC
weltop
China Shandong
8454309000
Product Description
The seven-station cylinder liner centrifugal casting production line is used for the centrifugal casting production of large-volume automobile and motorcycle burr cylinder liner, as well as tubular metal castings of similar sizes. The equipment is characterized by high degree of automation, high production efficiency, small area occupation and stable casting quality.
1. There are seven stations in the production line, which are mold spraying station, cleaning station, three pouring stations, picking station and water-cooling station;
2. The production line can produce up to six molds at the same time, and the molds are rotated through the upper conveyor and lower conveyor between the seven stations according to the technological sequence of picking up, cooling, cleaning, spraying and pouring;
3. Equipped with automatic pouring machine to complete the transfer and pouring of molten iron from holding furnace to pouring station. The pouring speed can be adjusted according to the process;
4. Unique full-automatic control system can ensure that the production line can operate as usual when various problems such as castings can not be taken out, unqualified spraying quality and so on occur in the process of mold production. The problematic molds can be rejoined into the production process after the treatment is completed;
5. The spraying device can automatically complete the complex spraying process to ensure the uniformity and stability of the mold coating.
No. | Name | Value | Unit |
1 | The outer diameter of the casting | Φ70~Φ100 | mm |
2 | Mold length | 2000~2100 | mm |
3 | Mold groove diameter | Φ150~Φ175 | mm |
4 | Diameter of riding wheel | Φ250X70 | mm |
5 | Outer gear distance between two riding wheel | 1270 | mm |
6 | Center distance between two riding wheel | 1200 | mm |
7 | Ground to mold center distance | 700 | mm |
8 | Pipe mold speed | 0~2400 | rpm |
