Audited Supplier
| Shell material | galvanized sheet | |||
| Input power connection | L+P+PE, 3P+N+PE | |||
| Input frequency | 50/60Hz | |||
| Rated power | 3.5KW*2 | 7.5KW*2 | 11KW*2 | 22KW*2 |
| Rated voltage | 230Vac, 400Vac | |||
| Rated current | 16A*2 | 32A*2 | 16A*2 | 32A*2 |
| HMI | 4.3 inch touchscreen | |||
| Charging method | standard: plug ang charge, swipe the card; optional: QR code, APP | |||
| Networking mode | 4G, WIFI, Ethernet (optional ) | |||
| Operational platform | support OCPP 1.6 protocol | |||
| RCD | Type A (30 mA)+ 6mA (DC) | |||
| Charging connector | Type 2 (dual guns) | |||
| Cable length | 3.5 m (optional ) | |||
| Operating temperature | -30ºC~+55ºC | |||
| IP rating | IP 65 | |||
| Dimension | 345*255*1200 mm (W*D*H) | |||
| Installation method | floor standing | |||
Q: Are you the factory or trading company?
A: We are factory with more than 20 years in the field of DC power supply solution, traction power supply and new energies. We warmly welcome you for the visit.
Q: How is the delivery time?
A: Generally, the delivery time between 7-30 days after getting client's payment. For accurate info depends on the products and the quantity, we can make further communication on this.
Q: Do you have MOQ requirements?
A: MOQ 1 PC,besides,we have more than 100 technicans to fully meet with customized requirements.
Q: How long to fully charge a car?
A: To know how long to charge a car, you need to know the OBC(on board charger) power of the car, the car battery capacity, the charger power. The hours to fully charge a car =battery kw.h/obc or charger power the lower one. For e.g, the battery is 40kw.h, obc is 7kw, charger is 22kw, the 40/7=5.7hours. If the obc is 22kw, then 40/22=1.8hours.
Q: Can you provide customized service?
A: Yes. we have been getting involved with the OEM and ODM projects since 2004. So that we can provide professional customized service for our clients.
Q: Do you have after sales service?
A: Yes, we have the after-sales service team. Our after-sales engineer Can give the support and instruction by video or phone call while needed.
Q: Do you make the test after finishing production?
A: Yes, our production engineer team will do the test while goods finished, and we will prvoide the test info to clients for reference before delivery.
